IPDB › China Industry › Industrial Equipment & Components › Conveyor & Parts
Chip Screw Conveyor Manufacturers Cut and Folded Flight Screw Conveyor1
Conveyor Parts, Screw Conveyor, Auger Conveyor
Tangshan Zhonghe Anlan Industrial Co., Ltd
Preview:
Product Description Product Descriptionscrew conveyor is not interfered by the central axis, and has special advantages for conveying belt and winding materials. It is used to transport grid removed from sewage screening device and dewatered sludge cake. It has good environmental protection performance. It uses totally enclosed conveying and easy cleaning spiral surface, which can ensure environmental hygiene and the materials delivered are free from contamination and leakage. The torque is large and the energy consumption is low. Because the screw has no shaft, the material is not easy to be blocked and the discharge port is not blocked, the screw can operate at a lower speed, drive smoothly and reduce energy consumption. According to the standard of JB/T679-95 screw conveyor, shaftless screw conveyor has the characters of high reliability, long lifetime, good applicability, convenience to install and maintain. The temperature of materials can reach up to 100oC, the biggest dip angle can be up to 30°. The screw conveyor is a conveyor device, which utilizes the rotation of the helical axis in the U-groove to achieve the delivery of materials.The shaft-less screw conveyor is mainly composed of driving device, head assembly, shaft-less screw, groove liner, inlet, outlet, cover (when needed), base, etc. 1- The driving device adopts helical gear reducer. The reducer is opposite to the outlet when horizontal and the reducer is at the outlet when inclined. 2- The cabinet is U, and the upper part is covered with rain proof machine cover. The material is stainless steel or carbon steel. 3- Non - axial spirals: stainless steel or 16Mn. 4- Trough lining: nylon or polyethylene plate, nylon material. 5- There are two kinds of inlet and outlet: the square and the round. The form of general inlet and outlet is decided by the user and the square is the main one. Product ParametersMODEL SPECIFICATIONS AND TECHNICAL PARAMETERSMODELSPECIFICATIONSSPIRAL DLAMETER MMDPITCHmmSSPEEDr/min nSTANDARD VOLUME CONVEYING CAPACITYSPEEDr/min STANDARD VOLUME CONVEYING CAPACITYSPEEDr/min STANDARD VOLUME CONVEYING CAPACITYSPEEDr/minSTANDARD VOLUME CONVEYING CAPACITY Iv(m3/h)Iv(m3/h) Iv(m3/h)Iv(m3/h) ΦΦΦφΦΦΦΦΦφΦΦφΦφ 0.45 0.33 0.15 n0.45 0.33 0.15 n0.45 0.33 0.15 n0.45 0.33 0.15 SMALLLS100100 100 140 3.0 2.2 1.0 112 2.4 1.7 0.8 90 1.9 1.4 0.6 71 1.5 1.1 0.5 LS125125 125 125 5.2 3.8 1.7 100 4.1 3.0 1.4 80 3.3 2.4 1.1 63 2.6 1.9 0.9 LS160160 160 112 9.7 7.1 3.2 90 7.8 5.7 2.6 71 6.2 4.5 2.1 56 4.9 3.6 1.6 LS200200 200 100 16.9 12.4 5.6 80 13.5 9.9 4.5 63 10.7 7.8 3.6 50 8.5 6.2 2.8 MEDIUMLS250250 250 90 29.7 21.8 9.9 71 23.5 17.2 7.8 56 18.5 13.6 6.2 45 14.9 10.9 5.0 LS315315 315 80 52.9 38.8 17.6 63 41.6 30.5 13.9 50 33.1 24.2 11.0 40 26.4 19.4 8.8 LS400400 355 71 85.3 62.5 28.4 56 67.3 49.3 22.4 45 54.1 39.6 18 36 43.2 31.7 14.4 LARGELS500500 400 63 133.2 97.7 44.4 50 105.8 77.6 35.3 40 84.6 62.0 28.2 32 67.7 49.6 22.6 LS630630 450 50 188.9 138.5 63.0 40 151.1 110.8 50.4 32 120.9 88.6 40.3 25 94.4 69.3 31.5 OVERSIZEDLS800800 500 40 270.7 198.5 90.2 32 216.6 158.8 72.2 25 169.2 124.1 56.4 20 135.4 99.3 45.1 LS10001000 560 32 379.0 277.9 126.3 25 296.1 217.1 98.7 20 236.9 173.7 79.0 16 189.5 139.0 63.2 LS12501250 630 25 520.5 381.7 173.5 20 416.4 305.4 138.8 16 333.1 244.3 111.0 13 270.7198.590.2 NOTE:Ir=47 φ D2.S.n(THE UNIT OF P.S.IS m)THE LUMP SIZEOF THE MATERIALMATERIAL POLISHFILL FACTORKA POWDERNO POLISH,HALF POLISH0.35-0.400.0415 75 POWDERGRINDABILITY0.25-0.300.0565 35 SMALL BLOCKA<60MMNO POLISH,HALF POLISH0.25-0.300.0537 45 SMALL BLOCKA<60MMGRINDABILITY0.20-0.250.0645 25 TILT ANGLE0°≤5°≤10°≤15°≤20° C1.0 0.9 0.8 0.7 0.65 Detailed PhotosPackaging & ShippingCompany ProfileCustomer CasesFAQQ:What isthe quality of your products?A:We are A factory with 20 years of independent production,with three R&D departments and more than 20 professional technical personnel.We follow the customer feedback from us over the years and constantly improve our products.It is our purpose to control the quality of our products.Q:How to solve the customer's after sales service?A:We provide lifelong free online consultation on technology.If we need on-site guidance from engineers,we need to provide back and forth fees and basic salary for engineers.Q:How to contact me?A:Please look at my business card,you can speak at any time,or send an email,I will reply to you within 12 hours,and solve your problem.Q:If i want to customize some machines of different specifications?A:Please click on my business card and send me some product parameters that you want to customize.If you can provide photo drawings or samples for the best,our engineers will access them as soon as possible and provide you with Aplan.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.