Diamond Tool Wire Saw for Stone Cutting¹

Product Description Product descriptions from the supplierFast cutting diamond wire saw marble granite stone cutting ropesThe wire saw is used for cutting quarries, for squaring blocks or special-shaped block processing. Three essential components for diamond wire saw are as followed:1. Steel cable with diefferent diameter depending on the application2. Sintered diamond beads.3. Fixed method: springs, rubber or plastic. Protects the steel cable because of stone abrasive, and also sbsorbs the energy of the cutting friction of the beads against the stone. Our advantages: 1. High efficiency, safe, low-noise, less-dust, and enviroment-friendly.2. Good cutting with small slot.3. Few breakage raito at working thus sound lifetime.4. Professional engineers, experienced workers, strict quality control system, top quality material etc. ensure the stable quality.5. Other specifications are available upon request.  Diamond Marble Wire Saw for CuttingPRODUCT FEATURES:1: Good cutting result with small slot and high efficiency.2: Good sharpness and long life,low noise and eco-friendly.Diameter(mm)ConnectionBeads/meterLinear Speed(m/s)Application8.5/8.8Plastic+spring3720-30Granite Sandstone11Plastic4020-30Granite Sandstone11.5Plastic4020-30Granite Sandstone11.5Plastic+spring4020-30Granite Sandstone8.5/8.8Plastic3725-35Marble11Spring2825-35MarbleGranite Diamond Wire Performance:ApplicationAssemblyStone hardnessFeeding speedOutputLifespanGranite quarry Dia11.5mmSinter+RubberSoft Granite25-30m/s4-6m2/h15-25m2/mMedium hard22-26m/s2-5m2/h8-15m2/mHard Granite18-23m/s1-2.5m2/h4-9m2/mGranite Block dressing Dia11.0mmSinter+PlasticSoft Granite25-28m/s60-100cm/h15-25m2/mMedium hard22-25m/s40-60cm/h10-17m2/mHard Granite20-23m/s25-45cm/h8-12m2/mGranite profiling wire    Dia8.8mm Soft Granite25-29m/s6-10m3/h17-22m3/mPlasticMedium hard22-25m/s4-6m3/h12-17m3/m Hard Granite20-23m/s2.5-4.5m3/h10-14m3/m Diamond Granite Quarry wire:Diamond Granite Block dressing wire for Stationary wire saw machine Diamond Granite Profiling wire for Stationary wire saw machine: Diamond Marble Wire Performance: ApplicationAssemblyStone hardnessFeeding speedOutputLifespanMarble quarry Dia11.0mmSinter+RubberSoft Marble35-40m/s10-20m2/h40-70m2/mMedium hard33-38m/s8-16m2/h25-45m2/mHard Marble30-35m/s5-8m2/h20-30m2/mSinter+RubberSoft Marble35-40m/s10-20m2/h35~55m3/mMedium hard33-38m/s8-16m2/h15~35m3/mHard Marble30-35m/s5-8m2/h10~25m3/mVacuum brazed  +SpringSoft Marble52-60m/s15-30m2/h33-58m2/mMedium hard50-57m/s15-24m2/h28-38m2/mHard Marble45-53m/s8-12m2/h17-25m2/m Diamond Marble quarry Wire Dia11.0mm  Sinter+Rubber Diamond Marble quarry Wire Dia11.0mm  Sinter+Spring  Marble block dressing Wire & profiling wire perofrmance: ApplicationAssemblyStone hardnessFeeding speedOutputLifespanMarble Block dressing Dia11.0mmSinter+PlasticSoft Marble30-35m/s90-130cm/h40-60m2/mMedium hard28-32m/s70-100cm/h25-40m2/mHard Marble26-30m/s60-80cm/h20-30m2/mMarble profiling wire    Dia8.8mmSinter+PlasticSoft Marble30-35m/s100-150cm/h35-45m3/mMedium hard28-32m/s80-120cm/h30-40m3/mHard Marble26-30m/s70-100cm/h25-30m3/mAttention: 1. Regular inspections of diamond wire self rotation and adjust in time.2. Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened, and make the solution in time if occurs.3. Regular inspections the joint, as well as the beads of two sides, if they are abrase badly, replaces them in time.4. The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm).5. Linear speed is ajusted according to stones hardness.6. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard mentioned above, it is good for sharpen. 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.