CIPDB › China Industry › Instruments & Meters › Meter for Electricity
Megger Mit2500 Hand-Held Insulation and Continuity Tester, 2.5 Kv1
Meter for Electricity2.5 KvMeggerMegger Mit2500
Shenzhen HOBOY Instruments Co., Ltd.
Preview:
Product Description Designed for motor and cable testing, specialist applications and electrical testing applications, where operation voltages exceed 1000 V and higher insulation test voltage needed. The MIT2500 offers both fixed range voltages of 50, 100, 500, 1000 and 2500 V, as well as a range that allows any voltage between 50 and 2500 V to be "dialed in". This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test.Megger MIT2500 - 2500V Insulation TesterGuard terminal for high resistance accuracyAdjustable insulation test voltage from 50 V to 2500 VStabilised insulation test voltageRechargeable options for mains and car chargingThe MIT2500 Insulation and Continuity Tester has been designed for motor and cable testing, specialist applications and electrical testing applications, where operation voltages exceed 1000 V and higher insulation test voltages are needed.The MIT2500 offers both fixed range voltages of 50 V, 100V, 250 V, 500 V, 1000 V and 2500 V, as well as a variable range that allows any voltage between 50 V and 2500 V to be "dialled in". This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test.Product ParametersInsulationAccuracy50 V, 10 GΩ ± 2%, ±2 digits ±4% per GΩ100 V, 20 GΩ ± 2%, ±2 digits ±2% per GΩ250 V, 50 GΩ ± 2%, ±2 digits ±0.8% per GΩ500 V, 100 GΩ ± 2%, ±2 digits ±0.4% per GΩ1000 V, 200 GΩ ± 2%, ±2 digits ±0.2% per GΩ2500 V, 200 GΩ ± 2%, ±2 digits ±0.2% per GΩService error: BS EN 61557-2 (2007)50 V, ± 2% ±2d, 100 to 900 kΩ ±10.5%100V, ± 2% ±2d, 100 to 900 kΩ ±10.3%250 V, ± 2% ±2d, 100 to 900 kΩ ±10.3%500 V, ± 2% ±2d, 100 to 900 kΩ ±10.3%1000 V, ± 2% ±2d, 100 to 900 kΩ ±11.5%Guard Terminal Performance<5% error at 500 kΩ parallel circuit resistance with 100 MΩ loadDisplay RangeAnalogue: 1 GΩ full scaleResolution0.1 kΩShort Circuit/Charge Current2 mA +0% -50% to EN 61557-2 (2007), except 2500 VTerminal Voltage Accuracy-0%, 2%, ±2 VTest Current1 mA at minimum pass value of insulation to a maximum of 2 mA maximumOperationEN61557: 0.1 MΩ to 1 GΩMaximum Capacitive Load15 nF on tests above 1000 VLeakage Current Display10% ±3 digitsVoltage±3% ±2 digits ±0.5% of rated voltageTimer ControlCountdown timer 60 second (adjustable to 10 minutes)*Note: The "Insulation" specifications only apply when high quality silicone leads are being used.ContinuityMeasurement0.01 Ω to 1 MΩ (0 to 1000 kΩ on analog scale)Accuracy±3% ±2 digits (0 to 100 Ω)±5% ±2 digits (100 Ω to 500 kΩ)Service error: BS EN 61557-4 (2007) - ±2%, 0.1 to 2 Ω ±6.8%Open Circuit Voltage5 V ± 1 VTest Current200 mA (–0 mA, 20 mA), 0.01 to 4 ΩPolaritySingle polarity (default)/dual polarity (configurable on setup)Lead ResistanceNull up to 10 ΩGeneral SpecificationsVoltageRange:DC: 0 to 600VAC: 10 mV to 600 V TRMS sinusoidal (15 to 400 Hz)Unspecified: 0 to 10 mV (15 to 400 Hz)Accuracy:AC: ±2% ±2 digitsService error: BS EN 61557-1 (2007) - ±2% ±2d, 0 V 300 V AC/DC ±5.1%Waveform:Non-sinusoidal: ±3% ±2 digits >100 mV to 600 V TRMS ±8% ±2 digits 10 to 100 mV TRMSDefault voltmeter: ±0.5% ±1 digit (100 to 400 Hz) unspecifiedFrequencyMeasurement range: 15 to 400 HzMeasurement accuracy: ±0.5% ±1 digitsCapacitance MeasurementCapacitance range: 0.1 nF to 10 μFAccuracy: ±5% ± 2 digits (1 nF to 10 μF)Storage Capacity>1000 test resultsData DownloadBluetooth? wirelessBluetooth? Class IIRangeUp to 32.8' (10 m)TemperatureOperating: 14 to 131°F (-10 to 55°C)Storage: -13 to 158°F (-25 to 70°C)Calibration: 68°F (20°C)Co-efficient:<0.1% per °C up to 1 GΩ<0.1% per °C per GΩ above 1 GΩHumidity90% RH at 104°F (40°C) maximumPower Supply6 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) alkaline6 x 1.2 NiMH rechargeable cells may be usedBattery Life3000 insulation tests with duty cycle of 5 seconds ON /55 sec OFF at 1000 V into 1 MΩMaximum Altitude6561.68' (2000 m)FuseUse only 2 x 500 mA (FF) 1000 V1.26 x 0.24" (32 x 6 mm) ceramic fuse of high breaking capacity HBC 30 kA minimumSafety ProtectionThe instruments meet EN 61010- 1:2010 and EN 61010-2-030:2010 to 600 V phase to earth, Category IV. Refer to safety warnings suppliedEMCIn accordance with IEC 61326 including amendment No.1IP RatingIP54Dimensions9 x 4.25 x 2.32" (228 x 108 x 63 mm)Weight1.13 lbs (815 g)In the case: 3.14 lbs (1.75 kg)*Note: All quoted accuracies are at 68°F (20°C) What's included with the Megger MIT2500Hand-Held Insulation and Continuity TesterRed/Black/Blue Silicone Test Leads with Prods and Clips2.5 kV Red/Black/Blue Silicone Test Leads with ClipsCarrying Case6 x AA Alkaline BatteriesOwner's Information CDPackaging & Shipping
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...