Advanced 4-20mA Smart Flange Water Density Meter Device¹

Product Description Detailed PhotosDescription of 4-20mA Smart flange connection type water tuning fork dentiy meter  Fork sensors ---------- one pair  fork ceramic chipA piezoelectric ceramic is responsible for collecting vibrationThe fork is always vibrate in the resonant frequency of vibrationFork in different densities ,the resonance frequencies was different,.according to the relationship between the different vibration and density to calculate the densityThe resonance frequency of the tuning fork is between 1600-2400The higher the frequency the smaller density.Detailed Images 4-20mA Smart flange connection type water tuning fork dentiy meter Specification 4-20mA Smart flange connection type water tuning fork dentiy meter 1 Density range :0-3 g / CM3 (3 /2.5/ 2 /1.5/ 1)2 Output:4-20 mA  4-wire ( 2-wire system can not be used)3 Accuracy:0.001 g / cc, with a resolution of 0.0001 g / cc4 Insertion depth :(flange distance to the end of the fork, minimum 125 mm, up to 2 meters)5 Wetted material: stainless steel, Hastelloy C22, 400 manganese alloys, titanium, etc.6 Fork Coating: standard, PTFE or electrolytic polishing7 Power supply: 20 - 28 VDC, 35 - 45 mA8 Operating temperature range: -50 oC ~ + 200 oC9 Maximum working pressure: 20Mpa10 Fluid viscosity range: 0 - 20000 cP11Temperature coefficient: 0.1 kg / m3 / oC (corrected)12 Process connection: 1.5 "NPT threaded connection; DIN 50 PN40 and PN100 flange connection;13 Protection: IP6514  Display: Up density value, the density value can be switched to kg / cubic meter or g / cc by unit keys. Down display a temperature value (measured medium temperature ) temperature is original PT100015 Accessory:   temperature of 4-20 mA output signal16 The internal circuit board with automatic filtering function, other vibrations like pipe vibrations can eliminate away from the side of circuit and software,whichensure accuracy.Features 4-20mA Smart flange connection type water tuning fork dentiy meter 1. Adopting Germany piezoelectric ceramic piece, crossing gold process for ceramic piece to increase the inoxidizability of ceramic piece, thus increasing the service life of densitometer.2. Fork vibration original piece adopts Japan's high performance original piece, in which installed 24 AD converter, and the accurate recognition for frequency is 0.01HZ, to ensure the  sensitivity and accuracy of density.3.Fork density calibration adopts national density standard solution, to ensure the source and accurate of density. 4.The current circuit is independent of fork vibration circuit, there is isolating anti-interference inner, reducing the influence to instrument from disturb. 5. There is set density three point quick calibration, range adjust, current calibration etc function, to meet on-site working demands.  6.Using high precision measuring density, is mainly used in power plant. 7.Can not be affected by temperature, pressure and flow rate , the factor affecting measuring error Is less. Company Profile

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.