Big Test Space Door Shape Digital Brinell Hardness Tester with Software¹

Product Description Big Test Space Digital Brinell Hardness Tester With SoftwareFBS-3000M Brinell hardness tester adopts the latest fully automatic closed-loop sensor control technology, the stepless servo motor directly drives the ball screw to increase the force, and the force sensor closed-loop to feedback the force process and the size to the micro-grading, which will be permanently eliminated the traditional weight lever amplification loading system with the increase of use time due to hydraulic or motor deceleration error, or spindle knife edge friction caused by over loading or less loading fluctuations. The test force of this machine is from 62.5 to 3000Kgf, which can realize automatic measurement of Brinell hardness indentation. Features:1. The portal frame structure can test the hardness of large workpieces (customized).2. Using a dedicated numerical control system, a closed-loop electronic control system exerts the test force. The transmission part of the whole machine is completely composed of a stepping motor and a ball screw.3. The failure rate of the whole machine is low, maintenance is time-saving and labor-saving, and no hydraulic oil is required.It is stable and reliable when used in environments with large temperature differences.4. Loading mechanism: Fully closed-loop control sensor loading technology is adopted, without any load impact error, monitoring frequency is 100HZ, and the internal control accuracy of the whole process reaches 0.5%; the loading system is directly connected to the load sensor without any intermediate structure, and the load sensor directly measures the load of the monitoring pressure head for adjusting, the coaxial loading technology, no lever structure, not affected by friction and other factors; the unconventional closed-loop control system of the lead screw lifting loading system, the double linear frictionless bearing executes the probe stroke, almost no need to consider the aging and errors caused by any screw system;5. Electrical control mechanism: high-end electrical control box, well-known brand electrical components, servo control system etc.6. Safety protection device: all strokes adopt limit switches to ensure the operation of the equipment in the safe interval; except for the necessary exposed components, the rest adopts a covered structure.7. Operation and display: computer touch screen control, ergonomic design, beautiful and practical.Indentation measurement & reading: Fully automatic Brinell hardness measurement system.Application: It is suitable for the hardness test of cast iron, steel, non-ferrous metals and soft alloys, and also for the hardness test of some non-metallic materials such as hard plastics and bakelite.Technical Specifications: ModelFBS-3000MTest force62.5kgf(612.9N), 187.5kgf(1839N), 250kgf(2452N), 500kgf(4903N), 750kgf(7355N), 1000kgf(8907N), 1500kgf(14710N), 3000kgf(29420N)Brinell ScaleHBW2.5/62.5, HBW2.5/187.5, HBW5/62.5, , HBW5/250, HBW10/250, HBW5/750, , HBW10/250, HBW10/500  HBW10/1000, HBW10/1500, HBW10/3000   microscope magnification20X Resolution0.625μmHardness range4-650HBWDwell time1-99 seconds (can adjust to 1-200 seconds)Data outputTouch screen displaySoftwareAutomatically measuring the Brinell indentations and calculate to get hardness values. Generate test report including indentation image, hardness value, conversion value, etc.Work table size450x350mmTwo Vertical Frame distance570mmMaximum height of sample300mm (can be customized)Transmission modeball screwMotor typeServo motorPower supplyAC220,50HzSize / N.W750*450*1100mm; 300kgExecutive StandardISO 6506-2, ASTM E10, JIS Z2243, GB/T 231.2Standard Accessories: ItemQuantityItemQuantityMeasuring microscope 20X1Brinell hardness machine frame1Hardness block2Diameter 2.5mm / 5mm Hard alloy indenter1Software key1Diameter 10mm Hard alloy indenter1Camera1Manual book1Software Main Function:1. Automatic measurement: Automatically capture the indentation and measure the diameter and calculate the corresponding value of Brinell hardness;2. Manual measurement: Manually measure the indentation, the system calculates the corresponding value of Brinell hardness;3. Hardness conversion: The system can convert the measured Brinell hardness value HB to other hardness value such as HV, HR etc;4. Data statistics: The system can automatically calculate the average value, variance and other statistical value of the hardness;5. Standard exceeding alarm: Automatic mark the abnormal value, when the hardness exceeds the specified value, it automatically alarms;6. Test report: Automatically generate the report of WORD format, the report templates can be modified by the user.7. Data storage: Measurement data including the indentation image can be stored into file. 8. Other function: include all functions of image processing and measurement system, such as image capture, calibration, image processing, geometric measurement, annotation, photo album management and fixed times print etc. Features:Easy to use: Click on the interface button or press the camera button or press the run button to automatically complete all the work; if need manual measurement or modify the results, just drag the mouse; Strong noise resistance: The advanced and reliable image recognition technology can handle the indentation recognition on the surface of the complex sample, two kinds of automatic measurement mode to deal with the extreme situation;Software interface:EBP can supply all kinds of parts of Brinell hardness tester: EBP products export to over 60 countries: 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.