CIPDB › China Industry › Instruments & Meters › Automated Inspection Equipment
Belt Type Extrusion Pressure Inspector for Can Filling Line1
Automated Inspection EquipmentBeverages Test Equipmenton-Line Inspector
Sunrise Intelligent Equipment Co., Ltd.
Preview:
Product Description Product DescriptionEquipment introduction The equipment is a full automatic multi-function detection system equipment. Using extrusion online detection method, the can body to be detected is extruded by bilateral belts, it is used to detect. the pressure value in the can after the secondary sterilization. The stable capacity is 1200cans/min.Equipment principle In the process of can beverage packaging, due to the influence of the stability of production equipment and personnel operation level, there are different packaging quality defects in each packaging link of the production line, which will lead to a variety of unqualified products, thus affecting the quality of products. It specifically includes the following situations:NO.Quality DefectsExistence RiskCause1Block is laxMaterial leakedCapping machine problem2Cap brokenMaterial leakedCap problem If the pressure inside the cans is too high, too low or bad sealing, it will decrease after the secondary sterilization. The lid of the cans is out of shape and can't recover. It is hard for the conventional non-contact inspector to detect, we can only use the contact method to detect the unqualified ones.Extruding pressure inspector use the extruding and contacting pressure sensor technology.When the can reaches the inspector, the bilateral belt will extrude the can, the pressure sensor send the value to the control center, after analyzed to the value, the control center sends instruction to the rejecting device to reject the ones which are with higher or lower pressure. The inspecting system consists of HMI, pressure inspecting device and rejecting device. The pressure inspecting device is the core element. HMl includes the touch screen, tower light, operation interface. The rejector is the actuator of the system to reject the unqualified ones.Technical parameterDimension948*867*2200mm(L*W*H )Temperature0oC~45oCAir consumption of rejector≤0.01 L/timeExternal air source>0.6MpaPower0.5kwExternal air source flow>500 L/minCapacity72000CPHAltitude<3000mVoltageAC380V/3P Structure characteristicContact type inspectingChinese and English language menuColor HMIIP65 cabinetAlarm for continuous rejectingData save for kinds of rejectingDigital signal treatmentAccurate strike timing encoderAlarm dataNet remote control (optional)Pressure inspecting rangeDetection itemDetection accuracyDetection rangeRejection rateMis-rejection rateDetection value±0.02Mpa0.06Mpa≤X≤0.50Mpa≥99.9%≤0.3%
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...