Zw32-36.2kv Outdoor Pole Mounted Vacuum Auto Recloser¹

Product Description Product DescriptionZW32-36.2kV outdoor high-voltage AC vacuum circuit breaker automatic recloser (hereinafter referred to as "recloser") adopts the vacuum arc extinguishing principle. It is a three-phase AC 50Hz/60Hz outdoor high-voltage switchgear. It is mainly used in rural and urban power grids. 10-35kV outdoor power distribution system is used to divide and combine load current, overload current and short-circuit current; it can also be used in other similar places. The ZW32 series outdoor AC high-voltage vacuum circuit breaker complies with standards such as GB 1984 "AC High-Voltage Circuit Breaker" and the International Electrotechnical Commission IEC 60056 "High-Voltage AC Circuit Breaker".The recloser adopts solid insulation process technology to deeply integrate the vacuum arc extinguishing chamber, voltage sensor, current sensor, zero sequence current sensor, etc. with the main circuit inside the insulating pole, becoming a primary and secondary fusion and integrated solid insulated vacuum circuit breaker. . This product can be used with intelligent controllers to meet the functional requirements of reclosers, automatic sectionalizers, contact switches and user boundary switches on distribution network lines. At the same time, it can also connect to the central master station through various communication protocols, GPRS and other communication methods to form distribution network automation.The recloser is an automatic high-voltage electrical switch that can identify transient and permanent faults in the line, automatically clear the transient fault in the line, isolate the permanently faulty line, automatically restore the power supply to the power grid in non-faulty areas, and avoid causing long-term and large-area power outages. , to realize distribution network automation.The vacuum recloser adopts pole-embedded technology, a sealed vacuum bottle for fault interruption, and epoxy resin and silicone rubber for insulation. A permanent magnet mechanism is configured and combined with a spring mechanism. When the battery of the permanent magnet mechanism is exhausted, the closing and opening operations can be enabled through the spring mechanism.Why Use Reclosers?Reclosers provide an important foundation for achieving high safety and reliability of outdoor medium-voltage overhead lines, and are regarded by power companies around the world as important power equipment for realizing feeder automation. It detects and interrupts fault current and automatically restores service after a momentary power outage. Transient faults include transient circuit abnormalities caused by lightning, falling branches, wires blown by the wind, contact by birds, etc., but faults that can be eliminated automatically.The intelligent distribution recloser is a flexible outdoor vacuum switchgear that can be installed either overhead on a pole or structurally on the ground. When a temporary line failure occurs, it can trip and reclose multiple times (usually set to 3 to 4 times). If the fault is permanent, the recloser will lock after a preset number of recloses, isolating the faulty part from the main part of the system to avoid expanding the scope of the fault.Reclosers save a lot of time and money in power operation and maintenance. It can minimize the need for staff to go to the site for inspection and maintenance, minimize the power outage area, and help staff quickly locate problems and restore power supply. Ensure stable power consumption in residential, commercial, industrial and public facilities, and avoid heavy losses caused by frequent power outages.It can be adapted to every field of application and meets all requirements for outdoor use. It combines cutting-edge technology with high-quality engineering expertise to provide the best solutions and lead the medium-voltage power network into digitalization and intelligence.The pole-mounted recloser is a high-performance distribution switch. Its advantages are more obvious in ensuring the safety of equipment operation in coastal environments characterized by high air salt, high humidity, serious pollution, and many birds.First and Second Fusion FeaturesPrimary Recloser Part:The recloser adopts a three-phase pillar structure, which has the characteristics of stable and reliable breaking performance, no danger of combustion and explosion, maintenance-free, small size, light weight and long service life. The three-phase primary circuit is installed in the insulating sleeve of each phase. When a single-phase failure occurs, it will not cause a three-phase short circuit.The recloser adopts a fully enclosed structure with good sealing performance, which helps to improve moisture-proof and anti-condensation performance. It is especially suitable for use in cold or humid areas.The vacuum arc extinguishing chamber and current transformer are insulated with outdoor epoxy resin solid and covered with organic silicone, which are resistant to high and low temperatures, ultraviolet rays, and aging. It eliminates short circuit failures caused by condensation and is maintenance-free for 20 years. IP65 protection grade.The operating mechanism adopts a permanent magnet mechanism, which has the characteristics of long electrical life, reliable breaking and maintenance-free, and has more than 30,000 switching operations. Utilizes magnetic actuators to provide a lifetime of trouble-free operation. Used in conjunction with the permanent magnet controller, it can be used as an automatic detection, isolation and alarm for ring network line segment and branch line faults, monitor the operation of the line, and has the function of automatically restoring non-fault power supply. Switch configuration measurement, protection, control and communication function modules , to meet the requirements of power distribution automation.The recloser can be equipped with a three-phase current transformer of 600:1A or 800:1A for overcurrent or short-circuit protection. It is equipped with 6 capacitive sensors to collect voltage signals and the secondary output voltage is 3.25V/√3; It can also provide voltage and current collection signals to intelligent controllers;The opening and closing operations of the recloser can be operated manually or electrically and remotely. When matched with an intelligent controller, it can realize recloser functions, as well as remote control, telemetry, remote signaling, and remote adjustment.Secondary Intelligent Controller Part:Comply with IEC 61850 standard to achieve plug and play.It adopts high-performance digital signal processor and large-scale field programmable logic array, has powerful real-time data processing capabilities and rich memory resources, and meets the application requirements of advanced application software and communication, system management, human-computer interaction and other functions.It can be flexibly configured according to needs to facilitate the realization of "two remote" or "three remote" functions.Modular and standardized structure, using high-speed real-time serial bus, flexible expansion and easy maintenance.Based on the real-time Linux operating system, it adopts a hierarchical and modular software structure. Applications access underlying resources and data through open interfaces, separate data from applications, and support dynamic loading and unloading of applications. Applications are plug-and-play. Provide a unified support platform for various smart distribution network applications.Provide a PC-like software development environment, which can easily open new application software and add new application functions.Software and hardware redundancy design, with strong fault tolerance, self-diagnosis and self-recovery capabilities.The communication interface is standard and complete, meeting the needs of local interconnection, local maintenance and remote communication.Industrial-grade chip, adaptable to a wide range of ambient temperatures (-40~+85oC).Unique structural design, with good rainproof, moisture-proof, anti-fouling, anti-vibration and ventilation and heat dissipation capabilities.Strict lightning protection and anti-electromagnetic interference design, the anti-interference ability meets the requirements of IEC standard IV.Conditions of UseAmbient air temperature: -40oC~+60oC;Altitude: no more than 2,000 meters;The surrounding air may be contaminated by dust, smoke, corrosive gases, steam or salt spray;The wind speed does not exceed 34m/s (equivalent to 700Pa on the cylinder surface);Vibration or ground motion from switchgear and control equipment can be ignored;Pollution level: Level III.If the above normal usage conditions are exceeded, the user shall negotiate with the manufacturer.Appearance Size and Product StructureInternal Structure Diagram1.Vacuum interrupter.2.Current transformer.3.Integrated voltage sensor.4.Insulated pull rod.5.Manual OFF.6.Permanent magnetic actuator.7.ON/OFF indicator.8.Control cable contact.9.Grounding terminalRecloser ControllerThe recloser controller integrates microprocessing technology and modern network communication technology. It supports a variety of communication protocols and allows the selection of multiple communication methods to form a communication network. The switch can be operated locally manually or remotely, or remotely controlled through the communication network. If equipped with corresponding recloser or segmentation control device, it can be used as a recloser or segmentation device.Schematic Diagram of Connection Between Recloser and ControllerInstallationSpecial CustomizationThe above parameters are typical data; if the existing styles do not meet your specific demands, please contact us for a custom design.We have significant personalized customization development and production skills, allowing us to provide tailored solutions to customers all over the world.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.