CIPDB › China Industry › Instruments & Meters › Sensor
Ss Material Side Mounted Tuning Fork Level Sensor Vibrating Switch Tuning Fork Level Switch1
SensorLevel SwitchTuning Fork Level Switch
Hebei Xukang Meter Manufacturing Co., Ltd.
Preview:
Product Description Product Description Tuning fork level switch for solid, vibrating rod level switch Tuning Fork Switch vibrates to tuning fork by piezoelectric crystal and inherent frequency of tuning fork.It can monitor continuously to the change of frequency. When the tuning fork switch is used for low alarm (or low position control), the medium in the vessel is discharged downward passing through the tuning fork. When it is lower than the specific location and change the inherent frequency, this change is detected by electronic component, the output state is shifted; when it is used for high alarm (or high position control), the medium in the vessel go upward and contact with tuning fork which can shift the output state. changes, these changes are detected by the intelligent circuit, and converts it into a switch signal.Tuning fork level switch Application: Whatever feed,mud and drike or pulp,glue and dye.the level switch is suitable Water, mineral water Waste water, sewage, slurry, acid alkali solution Beer, beer starter culture, juice, beverage Paper pule, glue,dye,solid power and other similar good mobility materials Diesel and other similar dangerous liquids/ hazardous conditionsFeatures: High adaptation: no influence on electrical parameter and density of medium, suitable for various conditions. Scaling ,stir, turbulent flow, bubble ,vibration, middle viscosity, high pressure, high temperature etc. No calibration: no need for calibration on spot since no impact on electrical parameter and density of mediumMaintenance-free: no moving parts, no need to maintain after installation. Various Power supply: he vibrating fork level switch is 20~250VAC, 20~60VDC,Suitable for all Power supply place. Various Connection: The level switch with flange and thread connection for you reference. Product Parameters medium temperature -20oC-150oCmesured medium liquid, powder or granular solidmeasured medium density solid≥0.1g/cm3liquid≥0.7g/cm3measurd solid particle size ≤10mmMaximum liquid viscosity:<1000mm2 /sConnectionmethodG1",thread:G3/4,thread:1"NPTForkbodymaterial:SS304,SS316 stainlesssteel,PTFEEnclosureprotection class IP65Power supply voltageDC24V:AC220V 50HZelectricalinter faceM20*1.50utput signalrelayoutput:8A220VAC;8A24VDC Company ProfileCertificationsPackaging & Shipping
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.