Premium Repair Glue for Conveyor Belt Surface Restoration¹

Product Description LC8600 fast wear-resistant repair adhesive for conveying belt is a special cold patching adhesive for various conveying belts. It has the characteristics of fast solidifying at room temperature, firm adhesion with conveying belt, high tensile strength, high tear strength, high wear resistance, high impact resistance, high temperature resistance and flame resistance. It is commonly used for aging repair of working layer of strong belt (main shaft belt) in coal mines, for the rubber coating at the joint of belt buckle of conveying belt, for the anti-corrosion repair of exposed steel wire rope, for the repair of non-working layer and the working layer after tearing of the conveying belt, for the repair the sealing after the belt is excavated and repaired, for the partial-penetration repair of conveying belt, for the repair of sealing of the joint after cold vulcanization bonding of the conveying belt to prevent dust and moisture from entering into the joint, for the repair of carbonization of high-temperature conveying belt, and for the repair of the damaged and leaked outer frame of polyurethane sieve plate, etc.Resistant to high temperature of 130°, with no flow, fast solidifying, high-bonding strength and good abrasion resistance II. Performance Solidifying time ( under normal temperature), min>10Bonding strength with conveying beltPeel strength, Kg/cm2>20Shear strength, Kg/cm2>50Tensile strength, MPa>20Tear strength, KN/m>70Elongation, %>400Impact elasticity, %25Hardness, Shore A70-80Hardness, Shore A70-80Temperature resistanceWithin 150oCRunning time after belt repair0-10oC,h2.310-15oC,h1.815-20oC,h1.220-35oC,h0.8Repair quantity1.8 mm thickness1 square/set 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.