Slow-Drying Hot-Melt Adhesive Granules for Laminated Packaging Cartons¹

Product DescriptionHot melt adhesive for labeling plastic bottles, glass bottles, paper bags, gift boxes, for industrial assembly lineEngineered for high-speed production lines, our hot melt adhesive delivers relentless performance for labeling plastic bottles, glass bottles, paper bags, and gift boxes. Built to withstand demanding industrial environments, it ensures flawless adhesion across diverse substrates while keeping assembly lines running at peak efficiency.Key Technical AdvantagesUnstoppable Production Performance:Ultra-reliable bond strength eliminates label peeling or misalignment, even at blistering line speedsClog-resistant formula maintains >99% uptime with zero nozzle buildup or downtime for cleaningSuperior Material Compatibility:Conquers challenging surfaces: High-grip adhesion on glossy plastics, coated glass, and varnished gift boxesIntelligent open-time control adapts seamlessly to variable line speeds and application temperaturesOperational Excellence:Low-viscosity flow reduces pump load, cutting energy consumption by up to 30%Exceptional thermal stability resists degradation in high-heat or high-humidity environmentsIdeal for robotic labeling systems, automated filling lines, and high-speed packaging, this adhesive is the backbone of precision-driven productionwhere failure is not an option.SpecificationColor: Light yellow translucentViscosity: 180℃, 2500±5000Operating Temp Range: 160℃-180℃Melt Point: 90°C±5°CCuring Time: instantlyMain Material: Rubber; resinCertifications: Non-Toxic, CE, RoHS, SVHCCompany ProfileFoshan Haijinsha Refractory Materials Co., Ltd.Since: 2014Location: Sanshui, Foshan, Guangdong, ChinaSpecialty: Pioneers in delivering cutting-edge hot melt adhesive industry solutions.Capacity: An impressive 20,000 tons per year production capacity.OEM & ODM Service AvailableSpecialized laboratoriesFactory CapabilitiesFoshan HQ R&D Center: A sprawling 500+ sqm dedicated lab, equipped with over 100 substrate adhesion testing platforms.Comprehensive Material Analysis Reports: Detailed insights on viscosity, hardness, open time, weather resistance, and more.On-site Formulation Consultations: Tailored, engineer-led solutions to conquer unique bonding challenges.Factory Area: Expansive, purpose-built facility spanning over 3,000 sqm.Monthly Capacity: Boasting a verified large-scale production capability of over 2,000 MT.Core Extrusion Tech: Features 3x Fully Automated Screw Lines for consistent, high-precision extrusion output.CertificationsISO 9001MSDSSVHCFAQ1. The Nozzle Or Hose Is Clogged?Solution:Increase temperature or switch to low-viscosity glue→ Raise glue tank temperature by 5~10°C or use a lower viscosity adhesive for smoother flow.Clean the glue path system→ Turn off heating, disassemble nozzle/hose, and thoroughly purge with a dedicated cleaning solvent for optimal performance.Prevent recurrence→ Empty glue system if idle for more than 30 minutes; ensure daily cleaning of the spray head after operation.2. Hot Melt Adhesive Is Carbonized?Solution:Reduce temperature immediately→ Lower glue tank temperature by 10~15°C, ensuring it stays within the safe range specified in the technical manual.Remove carbonized residue→ Begin by draining the old glue and meticulously scrubbing the tank using a brass brush. This crucial step helps in eliminating any carbon deposits that may have formed.Ensure glue refill is conducted with precision and care.→ Maintain a glue level that is greater than 50% during operation. This is essential to prevent any risk of overheating.3. Is Your Hot Melt Adhesive Gelled?Solution:Immediately cease use and proceed to clean the entire system thoroughly.→ Carefully drain the gelled glue and flush both the tank and pipes using hot oil, ensuring the temperature does not exceed 120°C.Consider switching to a different adhesive type.→ Replace the current batch with a new one and consult your supplier for an anti-gelling formula to prevent future occurrences.4. Are You Experiencing Bubbling in Your Hot Melt Adhesive?Solution:Lower the temperature and allow the glue to settle.→ Set the temperature to the minimum recommended range and let the glue settle for a minimum of 30 minutes before using it.Opt for a low-moisture adhesive.→ Select vacuum-sealed glue or request a dry formula from your supplier to ensure optimal results.5. Is There Smoke Emitting From Your Hot Melt Adhesive?Emergency Response:IMMEDIATE SHUT DOWN REQUIRED→ Instantly cut power to all heaters and activate your ventilation systems.Inspect the temperature controls thoroughly.→ Conduct tests or replace any faulty sensors and controllers to ensure proper functionality.Switch to an adhesive that can withstand higher temperatures.→ Utilize a higher flash-point glue if smoke continues to persist at normal operating temperatures.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.