Premium Clear Hot Melt Glue Sticks for DIY Crafts and Projects¹

Product DescriptionCrystal Clear Hot Melt Glue Sticks Premium Quality: Clean & Safe hot melt glue sticks crafted specifically for DIY enthusiasts who cherish precision and excellence in their handmade projects.Key FeaturesClean & Precise: Experience minimal stringing and achieve mess-free bonds effortlessly.Safe & Low-Odor: Enjoy peace of mind with non-toxic certification and minimal fumes for a safer crafting environment.Fast & Strong: Get quick bonding within 15 seconds and enjoy a durable hold that stands the test of time.Wide Compatibility: Versatile performance on fabric, wood, foam, plastic, and beyond, ensuring your creativity knows no bounds.Gentle Adhesion: Low-melt temperature protects delicate materials, making it perfect for sensitive projects.Smooth Application: Ensure a reliable flow with no clogging, for a seamless crafting experience.User-Friendly: Reduced burn risk makes it ideal for all ages, promoting safe and enjoyable crafting for everyone.SpecificationColor: Transparent, Crystal ClearViscosity: 180℃, 20000±500Operating Temp Range: 150℃±5℃ (Gun Nozzle)Melt Point: 82°C±5°CCuring Time: 10-15sMain Material: EVACertifications: Non-Toxic, CE, RoHS, svchCompany ProfileFoshan Haijinsha Refractory Materials Co., Ltd.Since: 2014Location: Sanshui, Foshan, Guangdong, ChinaSpecialty: Pioneers in delivering cutting-edge hot melt adhesive industry solutions.Capacity: An impressive 20,000 tons per year production capacity.OEM & ODM Service AvailableSpecialized laboratories Factory CapabilitiesFoshan HQ R&D Center: A sprawling 500+ sqm dedicated lab, equipped with over 100 substrate adhesion testing platforms.Comprehensive Material Analysis Reports: Detailed insights on viscosity, hardness, open time, weather resistance, and more.On-site Formulation Consultations: Tailored, engineer-led solutions to conquer unique bonding challenges.Factory Area: Expansive, purpose-built facility spanning over 3,000 sqm.Monthly Capacity: Boasting a verified large-scale production capability of over 2,000 MT.Core Extrusion Tech: Features 3x Fully Automated Screw Lines for consistent, high-precision extrusion output.CertificationsISO 9001MSDSSVCHFAQ1. The Nozzle Or Hose Is Clogged?Solution:Increase temperature or switch to low-viscosity glue→ Raise glue tank temperature by 5~10°C or use a lower viscosity adhesive for smoother flow.Clean the glue path system→ Turn off heating, disassemble nozzle/hose, and thoroughly purge with a dedicated cleaning solvent for optimal performance.Prevent recurrence→ Empty glue system if idle for more than 30 minutes; ensure daily cleaning of the spray head after operation.2. Hot Melt Adhesive Is Carbonized?Solution:Reduce temperature immediately→ Lower glue tank temperature by 10~15°C, ensuring it stays within the safe range specified in the technical manual.Remove carbonized residue→ Begin by draining the old glue and meticulously scrubbing the tank using a brass brush. This crucial step helps in eliminating any carbon deposits that may have formed.Ensure glue refill is conducted with precision and care.→ Maintain a glue level that is greater than 50% during operation. This is essential to prevent any risk of overheating.3. Is Your Hot Melt Adhesive Gelled?Solution:Immediately cease use and proceed to clean the entire system thoroughly.→ Carefully drain the gelled glue and flush both the tank and pipes using hot oil, ensuring the temperature does not exceed 120°C.Consider switching to a different adhesive type.→ Replace the current batch with a new one and consult your supplier for an anti-gelling formula to prevent future occurrences.4. Are You Experiencing Bubbling in Your Hot Melt Adhesive?Solution:Lower the temperature and allow the glue to settle.→ Set the temperature to the minimum recommended range and let the glue settle for a minimum of 30 minutes before using it.Opt for a low-moisture adhesive.→ Select vacuum-sealed glue or request a dry formula from your supplier to ensure optimal results.5. Is There Smoke Emitting From Your Hot Melt Adhesive?Emergency Response:IMMEDIATE SHUT DOWN REQUIRED→ Instantly cut power to all heaters and activate your ventilation systems.Inspect the temperature controls thoroughly.→ Conduct tests or replace any faulty sensors and controllers to ensure proper functionality.Switch to an adhesive that can withstand higher temperatures.→ Utilize a higher flash-point glue if smoke continues to persist at normal operating temperatures.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.