CIPDB › China Industry › Chemicals › Adhesive
Marine-Grade Am-120A for Boat Hull and Deck Waterproofing1
AdhesiveLow-Odor SealantDeep Gap Filling Sealant
Shandong North Modern Chemical Industry Co., Ltd
Preview:
Product Description ShanQuan AM-140E Neutral Polyurethane Waterproof PU Leather Adhesive Construction Sealant for Glass Wind Screen Transportation ShanQuan AM-140E is a one-component polyurethane adhesive with medium to high viscosity and medium to high strength. It has moderate viscosity and good thixotropy for easy construction. After curing, it has high bonding strength and good flexible sealing properties.Product featuresExcellent bonding performanceExcellent extrudability and thixotropy, non-sag. ApplicationIt is used for permanent elastic bonding sealing of general bonding strength, such as windshield bonding of small vehicles, bus skin bonding, automobile windshield repair, etc. Applicable substrates include glass, fiberglass, steel, aluminum alloy (including painted), etc. Direction for useThe bonding surface should be clean, dry, and free of grease and dust. If there is easy peeling rust on the surface, it shouldbe removed with a metal brush in advance. If necessary, the surface can be wiped with an organic solvent such as acetones.Depending on the base material and preliminary test results, decide whether to use matching activator and/or primer, and apply according to its technical instructions.ApplicationCartridge: Open the easy-open cover at the back, pierce the film at the mouth of the tube, screw on the matching glue nozzle, and load the glue into the hard packaging glue gun;Sausage: Put the glue into the soft packaging glue gun and cut off the sealing mouth, attach the matching glue nozzle, and tighten the gun cover;Barrel packaging: depends on the glue extrusion pump and glue coating equipment;According to the construction requirements, the glue nozzle is cut into triangles or circles, and glue can be applied in spotsor strips. It must be installed and positioned within the glue surface drying time.ItemsPropertiesAppearanceBlack, homogeneous pasteDensity (uncured)1.20±0.10g/cm 3Tack free time(min) GB/T 13477.520, approx.Curing speed(mm/d) HG/T 4363≥3.0mm/24hNon-volatile contents ( %) GB/T 279396, approx.Shore A-hardness GB/T 531.150Tensile strength(MPa) GB/T 528≥3.0MPaElongation at break(%) GB/T 528≥400%Tear strength( N/mm) GB/T 529≥7.0N/mmTensile-shear strength(MPa)GB/T 71242.5, approx.Operating temperature(oC)-40~90
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...