SS5564 Silver Grey RTV Silicone Sealant For Replacing Gaskets¹

Product Description  Product Description Automobile RTV Silicone Sealant HM-SS5564ItemsUnitIndicatorTypical ValueAppearance- -Skin timemin≤3010Curing rate (25oC,50%)mm/24h≥2.03Density(25oC,50%)g/ml≤1.101.08Extrudabilityg/min--650Elastic recovery rate%≥8095Hardness (A)-≤4030Tensile strengthStrength at 23oC≥1.51.8Elongation at break (%)≥200450Loss rate%≤1514Notes: *a, Conditioning, specimen is conditioned under (23±2) oC, (50±5)% relative humidity if not specified; *b, Testing Condition, specimen is tested at (23±2) oC, (50±5)% relative humidity if not specified;;*c, Substrate*d, Others need to be specified.The above data is intended to provide guidance for use and should not be used to write product specifications.HM-SS5564 Room temperature vulcanizing (RTV) silicone sealant, suitable for replacing gaskets. It is easy to use and meets the requirements for on-site shaping, curing, production, and maintenance. Using a new environmentally friendly formula, this non-toxic and low odor sealing adhesive provides temperature resistance, oil resistance, and corrosion resistance, making it an excellent alternative to traditional gaskets. It is widely used for flat sealing of engines, gearboxes, axle housings in automobiles, motorcycles, ships, and machinery equipment. It is the best solution for solving flat sealing problems during assembly and maintenance.Previously, solid gaskets such as paper, asbestos, and metal were used for flat sealing. However, these solid gaskets are prone to leakage over time due to stress or infiltration.To completely solve the problem of leakage, anaerobic sealants or silicone sealants are now being chosen to replace solid gaskets for sealing purposes. This product has excellent adhesive strength, instant sealing, oil resistance, high and low temperature resistance, weather resistance, and pressure resistance. Features 1. Excellent adhesive strength2. Instant sealing3. Oil resistance4. High and low temperature resistance5. Weather resistance6. Pressure resistance ApplicationMainly used for flange sealing, with excellent oil resistance and ability to withstand large movement of adhesive joints, such as stamped metal covers (such as timing gear covers, oil pans, engines). Usage Guidelines1. Pre-treatment: For optimal bonding performance, the surface of the substrate should be clean and free of grease.2. Adhesive application: Apply a bead of the product on the clean surface of the substrate, assemble the parts within five minutes. Press the parts together to ensure even distribution and full filling of the adhesive.3. Curing: The adhesive point should be fully cured before bearing heavy loads. The curing speed depends on environmental humidity and temperature.4. If there is excess adhesive, it can be removed with a non-polar solvent.Storage and Shelf Life Store the original sealed adhesive in a dry place with a temperature not exceeding 27 degrees.The storage period is 12 months from the date of production. Color and PackageSilver GreyDifferent colours are available. 300ml/tube, 70ml/tube, 50ml/tubeSafetyKeep out of reach of children. Before operation, please carefully read the specifications of products and material, and instructions on the package of container. For more information about safety, please About UsNanjing Howell New Material Technology Co., Ltd.Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (211899), Jiangsu, China.Acsic Ingredients, LLC.Add: 565 Metro Place South STE 300 Dublin, OH 43017.Factory:No.1008, Panshan Village, Lipu Town, Zhuji City, Shaoxing City, Zhejiang Province, China.   

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.