Two Component Thermal Foam Polymeric Mdi Isocyanate¹

Product Description Two Component Thermal Foam Polymeric Mdi IsocyanateProduct DescriptionLupranate?M20S is a polymeric MDI with a functionality of approximately 2.7. Lupranate M20S is suitable for the production of rigid insulation foams by molding, spraying, and frothing. It is also used for rigid and semi-flexible integral skin foams, adhesives, sealants, elastomers, and high-resiliency flexible foams. Inlow catalyzed rigid urethane formulations, the foam rise time can be lengthened by 20-30%. The slower reactivity can be advanta- geous in applications such as large rigid foam panels or molded flexible foams.Product Parameters Appearance.............................................................dark brown liquidNCO content, wt. %.....................................................................31.5Viscosity @ 25°C, cps.................................................................200Hydrolyzable chlorine, wt. %.......................................................0.035Flash point, °C (COC).................................................................. 200Density @ 25°C, g/cm3...............................................................1.23Initial boiling point, 5 mm Hg, °C...................................................190Vapor pressure @ 25 °C, mm Hg..............................................0.0002Packaging & ShippingPackage 250KG/DRUM ,IBCStorageLupranate M20S is supplied in tank cars, tank trucks, and drums. Once a container has been opened, care should be taken to exclude moisture. The most favorable temperature for storage is 15-35°C. If stored at higher temperatures, or if moisture is not excluded, an undesirable increase in viscosity will occur. Below 15°C, the product becomes difficult to pump and pour. Below 0°C, crystallization may occur. The shelf life of Lupranate M20S is six months if the temperature is maintained at 15-35°C and moisture is excluded. Warning: These products can be used to prepare a varietyofpolyurethaneproducts.Polyurethanesare organic materials and must be considered combustible.Company Profile     

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.