CIPDB › China Industry › Chemicals › Plastic & Polymer
411-350ashland Liquid Epoxy Vinyl Ester Resin Polyester Resin Based on Bisphenol-a Epoxy Resin in Chemical Processing Pulp Paper Operations1
Plastic PolymerChemicalVinyl Ester Resin
Evergreen Chemicals Co., Ltd.
Preview:
Product Description Ashland 411-350 Epoxy Vinyl Ester ResinProduct Description DERAKANE 411-350 Product descriptionDERAKANE 411-350 epoxy vinyl ester resin is based on bisphenol-A epoxy resin and has become the "industry standard" due to its wide range of end-use applications and ability to be used in a wide range of fabrication techniques. The raw materials used in the manufactureof this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food, subject to user's compliance with the prescribed limitations of that regulation. Equipment fabricated with DERAKANE 411-350 resin has superior elongation and toughness and better impact resistance and less cracking due to cyclic temperature,pressure flutuations and mechanical shocks providing a safety factor against damage during process upsets or during shipping installation.Composites fabricated with DERAKANE 411-350 resin provide resistance to a wide range of acids,alkalis, bleaches and solvents. This resin holds up well in corrosive invironments, postponing the need for replacements. Equipment fabricated with DERAKANE 411-350 resin tolerates heavy design loads without causing failure due to resin damage. This facilitates working with large weight-bearing equipment with confidence. DERAKANE 411-350 APPLICATIONS AND USE -DERAKANE 411-350 resin is designed for use in fabricating FRP storage tanks, vessels, ducts and on-site maintenance projects, paticularly in chemical processing and pulp and paper operations. - The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications. - An alternate viscosity, optimized for some vacuum infusion processes is available as DERAKANE MOMENTUM 411-200 resin. - An alternate for low styrene content (HAP) is available as DERAKANE 441-400 resin.TYPICAL LIQUID RESIN PROPERTIESProperty(1) at 25°C (77°F)ValueUnitDynamic Viscosity370mPas (cps)Kinematic Viscosity350cStStyrene Content45%Density1.046g/ml DERAKANE 411-350 CERTIFICATES AND APPROVALSThe manufacturing, quality control and distribution of products, by Ashland Performance Materials,comply with one or more of the following programs or standards: Responsible Care, ISO 9001,ISO 14001 and OHSAS 18001. DERAKANE 411-350 HANDLING AND STORAGE Standard Package: 55-Gallon (208 liter) Drum, Non-Returnable, Net Wt. 205 kgs (452 Lbs.) Dot Label Required: Flammable Liquid Drums - It is highly recommended that all material is stored at stable temperatures below 25°C (77 °F).Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock.Bulk - See Ashland's Bulk Storage and Handling Manual for Polyesters and Vinyl Esters. A copy of this may be obtained from Ashland at +1.614.790.3333 or 800.523.6963.When stored in accordance with the above conditions, Ashland warrants this product to remain within specifications for six (6) months from date of manufacture. All things being equal, higher storage temperature will reduce product stability and lower storage temperature will extend product stability. Product ParametersDERAKANE 411-350 NoticeAll information presented herein is believed to be accurate and reliable, and is solely for the user's consideration, investigation and verification. The information is not to be taken as an express or implied representation or warranty for which Ashland assumes legal responsibility. Any warranties, including warranties of merchantability, fitness for use or non-infringement of intellectual property rights of thirdparties, are herewith expressly excluded.MEKP Cure SystemTypical geltimes(2) using NOROX(3) (ME)KP-925H(4) catalyst (MEKP) andCobalt Naphthenate-6%(5)(Co-nap6%), Dimethylaniline (DMA) and 2,4-Pentanedione (2,4-P).Geltime at 15 °C (59 °F)MEKP(phr)(6)Co-nap6%(phr)DMA(phr)2,4-P(phr)15 +/- 5 minutes1.50.30.2-30 +/- 10 minutes1.50.30.05-60 +/- 15 minutes1.250.30.050.04Geltime at 20°C (68°F)MEKP(phr)Co-nap6% (phr) DMADMA(phr)2,4-P(phr)15 +/- 5 minutes1.50.30.1-30 +/- 10 minutes1.50.30.050.0360 +/- 15 minutes1.50.30.050.06Geltime at 25°C (77°F)MEKP(phr)Co-nap6% (phr) DMADMA(phr)2,4-P(phr)15 +/- 5 minutes1.250.20.05-30 +/- 10 minutes1.250.2-0.0260 +/- 15 minutes1.50.2-0.05Geltime at 30°C (86°F)MEKP(phr)Co-nap6% (phr) DMADMA(phr)2,4-P(phr)15 +/- 5 minutes10.20.02-30 +/- 10 minutes1.250.2-0.0460 +/- 15 minutes1.250.2-0.06Geltime at 35°C (95°F)MEKP(phr)Co-nap6% (phr) DMADMA(phr)2,4-P(phr)15 +/- 5 minutes10.2-0.0230 +/- 10 minutes10.2-0.0560 +/- 15 minutes10.2-0.08PropertyValue (SI)MethodValue (US)MethodTensile Strength86 MPaISO 52712000 psiASTM D638Tensile Modulus3200 MPaISO 527460 kpsiASTM D638Tensile Elongation at Yield5-6%ISO 5275-6%ASTM D638Flexural Strength150 MPaISO 17822000 psiASTM D790Flexural Modulus3400 MPaISO 178490 kpsiASTM D790Heat Distortion Temperature(8)105 °CISO 75220 °FASTM D648Glass Transition Temperature, Tg2120 °CISO 11359-2250 °FASTMD3419Volume Shrinkage7.80%-7.80%-Barcol Hardness35EN 5935ASTM D2583Density1.14 g/cm3ISO 1183-ASTM D792Tensile Strength150 MPaISO 52722000 psiASTMD3039Tensile Modulus12000 MPaISO 5271700 kpsiASTMD3039Flexural Strength210 MPaISO 17830000 psiASTM D790Flexural Modulus8100 MPaISO 1781200 kpsiASTM D790Glass Content40%ISO 117240%ASTMD2584Use of cobalt octoate, especially in combination with 2,4-P can result in 20-30% slower geltimes.phr = parts per hundred resin molding compound.Cure schedule: 24 hours at room temperature and 2 hours at 120°C (250 °F).Maximum stress: 1.8 MPa (264 psi).Cure schedule: 24 hours at room temperature and 6 hours at 80 °C (175 °F).Laminate construction of 6mm (1/4")is V/M/M/Wr/M/Wr/M where V=Continuous veil glass,M=Chopped strand mat 450 g/m2(1.5 oz/ft2) and Wr=Wowen roving 800 g/m2(24 oz/yd2). Application Our AdvantagesWhy Choose Us?1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.3.Corporate With World Famous Brand, Quality Assured, Cost Effective .4.Professional And Strong Technical Support.5.Full Line Nouryon Brand Peroxides6.Hot Chemicals, Short Of Supply Chemicals, We Have .7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.Production Process Company ProfileEvergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc. Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers. CertificationsFAQ
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...