CIPDB › China Industry › Chemicals › Plastic & Polymer
HDPE High Quality and Inexpensive Low-Pressure High Density Polyethylene1
Plastic PolymerHDPEBlow Molding Grade
SINOPEC Baling Petrochemical Co., Ltd.
Preview:
Product Description Product DescriptionHigh density polyethylene (HDPE) is a white powder or granular product. Non toxic, odorless, with a crystallinity of 80% to 90%, a softening point of 125 to 135 oC, and a usage temperature of up to 100 oC; Hardness, tensile strength, and creep resistance are superior to low-density polyethylene; Good wear resistance, electrical insulation, toughness, and cold resistance; Good chemical stability, insoluble in any organic solvent at room temperature, resistant to acid, alkali, and corrosion by various salts; Thin films have low permeability to water vapor and air, and low water absorption.Product DetailsItemTypical ValueMelt mass-flow rate (g/10min)10±2.0Density(g/cm3)0.935-0.945Tensile Yield Stress(MPa)≥21.0Tensile Fracture Stress(MPa)≥35.0Tensile Fracture Strain(%)≥600Product UsageHigh density polyethylene resin can be used to form plastic products through injection, extrusion, blow molding, and rotational molding methods. Injection molding can be used to produce various types of containers, industrial accessories, medical supplies, toys, shells, bottle stoppers, and covers. Blow molding can be used to form various hollow containers, ultra-thin films, etc. Extrusion molding can be used to form pipes, stretch strips, strapping, monofilaments, wire and cable sheaths, etc.In addition, it can also be molded into decorative panels for construction, blinds, synthetic wood, synthetic paper, synthetic film, and molded calcium plastic products.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...