CIPDB › China Industry › Chemicals › Plastic & Polymer
High Stiffness High Flow Low Water Absorption Low Warpage Nylon Mxd61
Plastic PolymerHigh Stiffness Nylon Mxd6High Flow Nylon Mxd6
Beijing Energy Engineering Technologies Co., Ltd.
Preview:
Product DescriptionMXD6 nylon resins M30MXD6 Nylon Resin is a semi-crystalline polyamide resin, polymerized by adipic acid and MXDA, with very high rigidity and fluidity.M30 can be combined with fiberglass, carbon fiber, minerals and/or advanced fillers, M30 can be used with 50-60% of the glass fiber reinforced materials, and has extraordinary strength and stiffness. The reason this material is different is that even when filled with a high content of glass fiber, its smooth, resin-rich surface can still form a high-gloss surface without glass fiber, very suitable for painting, metal coating or natural reflection of the shell.Specificationdensity (g/cm3)1.194Melting point (℃)235Tensile strength Mpa100Flexural strength Mpa140Flexural modulus Mpa3500Charpy notched impact trengthe(23℃) Mpa3.0Granularity g/100 point1.7Yellow index-10PreponderanceSuitable for high flow of thin wallExcellent Surface finishHigh strength and stiffnessIt is a very fluid resin that can easily fill thin 0.5 mm walls even with up to 60% fiberglass.The perfect resin-rich surface has a highly polished appearance, even with a high fiberglass content.The tensile and flexural strength of M30 reinforced with 50-60% glass fiber is similar to that of many cast metals and alloys.Production quallity managementThe factory achieves efficient and stable production from raw materials to finished products through "full-process standardized control intelligent facilities", covering the following key processes and facilities:Raw Material Management Stage -- Possess a complete warehousing management system, tracking raw material inventory and batch trace. -- Raw material pretreatment system: Set up raw material filtration to remove impurities, avoiding the impact on product molecular weight distribution during the polymerization process. Polyization Production StagePost-treatment StageQuality Inspection Stage-- Core production facilities: Use batch reactors, equipped with precise temperature control systems (±0.5℃), pressure sensors, and stirring devices, ensuring polymer reactions proceed stably under set temperatures (280-300℃) and pressures.-- Automated control system: Through DCS (Distributed Control System) the whole process of feeding, temperature increase, temperature maintenance, and discharging is automatically controlled, real-time reaction data is collected and uploaded to the production management platform, and alarms automatically triggered in case of anomalies.-- Pelletizing and cutting system: The polymerization product is transported to the underwater cutter through melt pump, completing cooling and cutting simultaneously, and the uniformity of particle size is monitored in real-time through particle size analysis.-- Drying equipment: Set up a water extraction tower to remove unreacted monomers from the slices, and then use a vacuum hot air circulation dryer to control the moisture content within the allowable range, ensuring the of subsequent processing.-- Inspection facilities: Viscometer (monitors degree of polymerization), colorimeter; the laboratory is equipped a tensile testing machine, etc., to conduct a full range of tests on the molecular weight, melting point, tensile strength, and other indicators of the finished product, products that do not meet the standards are not put into storage.-- Quality traceability system: Through the correlation of raw material batches, production parameters, and finished product inspection data the "raw material-production-finished product" process is fully traceable.Environmental Protection and Safety Stage-- Environmental treatment facilities: Constructed wastewater treatment stationusing biochemical membrane separation process), waste gas incinerator (processing polymerization tail gas), and solid waste recovery system (recycling unreacted monomers, with emission indicators connected to the environmental monitoring platform in real-time.-- Safety control facilities: The workshop is equipped with combustible gas detectors, explosion-proof equipment and emergency shutdown systems (ESD) and fire sprinkler devices; employees must undergo safety training and wear smart safety helmets (with positioning one-key alarm) before entering the areaFactory area and warehouse overviewBeijing Energy Engineering Technology Co., Ltd. was founded by Mr. Qu Lianglong, a returned chemical engineering doctoral, in 2010. It is a high-tech company engaged in the development and service of refining,petrochemical and new chemical materials technologies.In 2020, the special polyamide project started construction, and it officially went into production in October 2021. The products include special nylon 66, MXD6 nylon resins, transparent nylon resins, and long-chain nylon resins, some of which have broken the foreign monopoly, providing a backing for the empowerment and upgrading of the downstream industry.The company's headquarters is located in Beijing, with additional research and development centers in Huanghua, Hebei and Karamay, Xinjiang, a production base in Huanghua, Hebei.It covers an area of more than 133,000 square meters.FAQQ1: What is the general addition amount of MXD6 when it is filled with high glass fiber?A: According to the amount of glass fiber filled, generally MXD6 can solve the problem of poor appearance when the addition amount is 5-15%.Q2: Can you complete the shipment within a week??A:Orders under 20 tons can all be arranged for delivery within one week.Q3: What are your advantages compared to similar products?A:Among domestic similar products, our company has a longer production history, the products are stable, and various indicators are closer to international products, and it has betterutability on the project.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...