CIPDB › China Industry › Metallurgy, Mineral & Energy › Refractory Material

Sintered Chromium Oxide Green: Superior Hardness for Mining Equipment Linings¹

Preview:

Product Description Sintered Chromium Oxide Green Physicochemical PropertiesCAS Number: 1308 - 38 - 9.Physical Properties: It is a dark green hexagonal or trigonal crystal with a metallic luster. The density is 5.21 g/cm3, the melting point is 2266 °C, and the boiling point is 4000 °C. It is insoluble in water and ethanol, slightly soluble in acids, soluble in sulfuric acid to form purple chromium sulfate, and soluble in strong alkalis to form dark green chromites. It is also soluble in hot alkali metal bromate solutions.Chemical Properties: Chemically stable, it is extremely stable to light, moisture, high temperature, hydrogen sulfide, and sulfur dioxide. It has semiconductor properties and is antiferromagnetic below 35 °C. When fused with divalent metal oxides, it can form chromites. It has a high covering power.Particle Size: The particle size of sintered chromium oxide green can vary depending on the production process and application requirements. Generally, the median particle size is in the range of 1 - 3 microns. Some products may have average particle sizes of about 1 μm, 2 μm, or 4 μm. There are also products with particle sizes as small as 700 nm. In addition, the particle size can be further adjusted according to specific customer needs, such as being made coarser or finer. For example, in some applications requiring coarser particles, the particle size may be in the range of 5 - 10 microns; while in applications requiring very fine particles, the particle size may be less than 1 micron.Hardness: The Mohs hardness of sintered chromium oxide green is 8.0 - 8.5. It is a relatively hard material, which is beneficial for applications requiring high hardness, such as grinding and polishing. In the process of grinding and polishing, it can effectively scratch the surface of the material to be processed, thereby improving the surface finish. Moreover, due to its high hardness, sintered chromium oxide green can maintain good wear resistance and mechanical stability during use, and is not easily worn or deformed.Density: The density of sintered chromium oxide green is 5.21 - 5.22 g/cm3. This high - density characteristic makes it have a relatively large mass in a certain volume, which is beneficial for applications where high density is required, such as in some metal - alloying and refractory material applications. In metal alloying, the addition of sintered chromium oxide green can increase the density of the alloy, thereby improving some of its physical and mechanical properties. In refractory materials, its high - density property helps to improve the compactness and thermal stability of refractory materials, enabling them to withstand higher temperatures and mechanical loads.Cr203 Pure chromium oxide powderCr203Pure chromium oxide ceramic powder Purity:99.5%Sintering and brokenTypical chemical composition Powder material typeCr203 Chrome oxide ceramic powder 99.5% Sintering and brokenbrand(JINSHI)JSXJ-106specifications(um)22/5 30/10 38/10 45/15Performance and applicationThe APsThe highest working temperature 540 chard, corrosion-resistant and wear-resistant ceramic coatinginsoluble in acids, bases and ethanolused for ceramic anilox roller, printing press roller, pump sealing area,wear ring, etc. DescriptionPowder material typeCr2O3 Chrome oxide ceramic powder 99.5% Sintering and brokenbrand (JINSHI)JSSJ-106specifications (um)22/5 30/10 38/10 45/15Performance and applicationThe APSThe highest working temperature 540 Chard, corrosion-resistant and wear-resistant ceramic coatinginsoluble in acids, bases and ethanolused for ceramic anilox roller, printing press roller, pump sealing area, wear ring, etc.Spray parameters Cr2O3baseSiO2<0.1%TiO2<0.1%Fe2O3<0.1%MgO<0.1%CaO<0.1%Al203<0.1%Cr met.<0.1%Spray parametersPlasmageneratorF4Injector/Angle1.8/90°Plasma Gas Ar(SLPM)55Plasma Gas H2(SLPM)9current(A)550Spray Distnce(mm)140The coating performanceHardness:approx.1250HV Applicable up to 500 Porosity:<2.5% Bond coat:316LThe product application The calender rollerAnilox rollerPart function: polishing paper duringmanufacturingPart function: guide and pull paperMatrix material: cast ironatrix material: steelCoating function: wear resistanceCoating function: corrosion protection and wearresistanceProcess technology: high speed oxygen gassprayingProcess technology: high speed oxygen gassprayingGansu Jinshi Chemical Co.Ltd (Founded in 2000) is mainly engaged in chromium based chemical production, covering metallurgy, new energy sources, new building materials, etc. The main products are chrome oxide green, chrome sulphate,e, trivalent chromium series,chromium metal, fused chromium oxide, etc.As well as the use of chrome salt slag to achieve a circular economy products such as aluminum hydroxide, ferrochrome alloy, etc. And the recycling economy products of , aluminium hydroxide, ferrochromium alloy and are realized by using chromium salt waste residue. It is the unique enterprise in the global chromium salt industry that fully realizes the comprehensive utilization and zero emission of chromium-containing waste residues.Jinshi has been certified to ISO9001 quality management system, ISO14001 environmental management system, GB/T28001 occupational health and safety management system , GB/T23331 energy management system certification and cleaner production audit.Our company is committed to providing customers with high-quality services and products. After years of accumulation and development, our products always maintain the core competitiveness in the market, and have won good credit in domestic and foreign markets.Our products list:Chrome oxide greenChromium oxide greenFused chrome oxide greenMetal ChromeSodium sulphideSodium hydrosulphideBasic chromium sulphateInorganic pigmentPigment 17

× More Keyword ..

× More Menu ..

×

Manufacturing & Processing Machinery

×

Industrial Equipment & Components

×

Tools & Hardware Products