0.18-1mm Cold-Rolled Steel Rolling Mill¹

Product Description General Information of 0.18-1mm cold rolled  steel rolling mill 1. Brief introduciton of 0.18-1mm cold rolled  steel rolling mill The production of this unit is to roll hot rolled coils with the thickness of 2.0~4.5mm into high precision cold rolled coils with the thickness of 0.18~1.5mm through several time of rolling. The scale of the cold rolling production line is a production of 225 thousand tons of cold rolled steel coils per year. It adopts the UCM-type single-stand 6-roll reversible cold rolling mill. The work roll of the rolling mill is equipped with positive and negative bending. The intermediate roll is equipped with positive bending and twitch. The uncoiler is equipped. Both front and rear frames are equipped with coiler, thickness gauge, laser velocimeter etc., which can realize large tension rolling and guarantee high-speed and stable production with specified thinness. 2. Characteristics of 0.18-1mm cold rolled  steel rolling mill 1450 6-roll reversible cold rolling unit is the cold rolling production line with designed annual output of 225 thousand tons and adopts UCM-type single-stand mill. Roll pickled hot rolled coils into cold hard coils. The unit is equipped with hydraulic AGC. The work roll is equipped with positive and negative bending and subsection cooling. The intermediate roll is equipped with the positive bending and moving, and the front and rear frames are equipped with double X-ray thickness gauge, double-laser velocimeter, etc. 3. Main technical dataSpecifications of Supplied MaterialsMaterial:Mechnical Property:Requirements: Thickness: Width: Coiling diameter (inner/outer):Max coil weight:  Q195,08Al,Q235,SPHC,SPHD,SPHEσs≤380  N/mm21) Strip camber: ≤5mm/2m; tower: ≤5mm2) Strip passband tolerance: ≤±0.15mm; transverse difference: ≤0.20mm3) Uniform hardness, and no obvious defects like inclusions, sinkholes or raw edges.1.2~4.5  mm800~1300  mmF610/F2000  mm26  t  Finished product specificationThickness: Width: Coiling diameter (inner/outer):        Max coil weight: 0.18~1.5 mm800~1300 mmF508/F2000  mm26  tFinished product precision:                                                          Longitudinal thickness tolerance(rolling at stable speed): <±0.005mm(d≤0.5mm)                                                                                           <±1.0%d  (d>0.5mm)Longitudinal thickness tolerance(speeding up or slowing down): <±0.01mm(d≤0.5mm)                                                                                                      <±2.0%d  (d>0.5mm)Transverse thickness tolerance(rolling at stable speed): <±1.5%dShape tolerance: ≤40I4. Main Technical Parameters of the UnitRolling mill specification:             F 1250F 450F 370′ 1450mmMax rolling pressure:                  18000 KNMax rolling torque:                      115 KN.mMax threading speed:                 30m/minMax uncoiling speed:                  500m/minMax rolling speed:                      1200m/minUncoiling tension:                       78~8 KNCoiling tension:                          180~18 KN  (I gear V<760  m/min)                                                            120~12  KN(II gear V≥760  m/min)5. For more information , please feel free to contact with me.if it cannot satisify you, please fill in the design form below, we can manufacture as you required.Our advantage:1) Customized Production 2) High cost-effective product3). All-around pre-sales & after-sales services4) Independent intellectual property rights5) good at establish cold rolling mill plant. For More information of this 0.18-1mm cold rolled  steel rolling mill , Please feel free  to contact Tony Liu, we can also offer after sale service from disassemble to commissioning.  

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.