Wear Resistant Steel Plate Cco Hardfacing Plate Chromium Carbide Overlay Wear Parts/Pipe¹

Product Description Wear Resistant Steel Plate Cco Hardfacing Plate Chromium Carbide Overlay Wear Parts/PipeHART Hardfacing Overlay Pipe is manufactured by depositing chromium-rich, abrasion-resistant materials on the mild steel pipe, using a traditional arc welding process. The Pipe is available with double or multiple overlay passes. And it can be fabricated as square-to-round transitions, elbows, T or Y- shaped.The hardfacing overlay pipe is designed with extreme wear capabilities for working in many applications: mining, cement, oil sands, dredging, recycling and steel production industries.[Technical Specification Of HART-PP-100 ]1.Outer Diameter: 80-2000mm2. Hardfacing Layer: Chromium carbon alloy on Fe basis(austenite)Bulk hardness: >630HVMean hardness: >55HRCLayer thickness: 3 to 30 mm3. Welding Processes: Advanced welding with internally or externally clad chromium carbide overlay. 4. Alloy Description: Austenitic chrome carbide iron(Chromium white iron)5. Carbide Hardness: >1750HV6. Volume Fraction of Carbide: >30%7. Chemical Composition: Carbon: 3-6%Chromium: 18-34%*Various alloys to be used depend on different operating condition and applications. ThickC%Cr%Mn%Si%HRC  3 on 33~418~200.5~10.5~156~58  3 on 43~418~200.5~10.5~156~58  3 on 53~418~220.5~10.5~158~60  3 on N3.5~4.520~250.5~10.5~158~62N>54 on N3.5~4.520~250.5~10.5~158~625 on N4~623~250.5~10.5~158~626 on N4~624~280.5~10.5~158~627 on N4.5~624~280.5~10.5~158~628 on N4.5~624~280.5~1.50.5~158~629 on N5~626~300.5~1.50.5~160~6410 on N5~626~300.5~1.50.5~160~6411 on N5~626~300.5~1.50.5~160~6412 on N5~626~340.5~1.50.5~160~64N on N5~626~340.5~20.5~160~64N>128. Microstructure: Composed of a high proportion of extremely hard primary M7C3 chromium rich carbides dispersed in a ductile eutectic austenite matrix. Maintains 30% to 50% of primary carbides to provide a good wear resistance and homogenous bonding. 9. Typical Applications: HART-PP-100 Pipe is widely used in the mining, power generation(Coal), cement, dredging, steel production, waste handling, glass production, and pulp and paper industries. Some specific applications include: INDUSTRYAPPLICATONSMiningSlurry pumps, chutesCementSlurry pumps, chutesDredgingDredging pipes and pumps, suction pipelines, pump dischargesSteelSuction pipelines, pump discharges, air ducts, carbon injection pipes, suction lines, troughsRecyclingCullet glass10. Wear properties of HART-PP-100 (ASTM G65 and SGS test report)*ASTM G65 is a standard test measuring sliding abrasion resistance using a dry sand/rubber wheel apparatus. HARDBANDING ALLOYASTM G65 -- WEIGHT LOSSHARDNESS (RC)10+10-80.162 g/6000 revs64.710+10-40.183 g/6000 revs63.710+10-20.149 g/6000 revs64.011. Service SERVICEDESCRIPTIONCutting1. Can be cut by plasma, laser, water jet, arc gouge, and abrasive saw cutting; 2. Cannot be cut by oxy-fuel. Welding1. Use 480 MPa (70 ksi) or 560 MPa (80 ksi) consumable to join base metal; 2. After welding, joint should be capped by overlay for wear protection. Machining1. Not machinable by conventional methods; 2. Can be finished by grinding only; 3. Countersunk holes can be precisely produced by EDM (Electrical Discharge Machining). Forming1. Commonly formed with overlay to the inside; 2. For pipes with diameters smaller than 0.6m (24"), hardfacing pipe recommended instead of pipes fabricated from hardfacing plate. Drilling1. When drilling, the distance between two holes should be at least 15mm (5/8''); Otherwise, the partition may not be strong enough and can crack; 2. The minimum diameter of holes should be equal to the thickness of the plates. For thicker plates with a total thickness over 20mm (3/4''), the minimum diameter should be 1.5 times the thickness of the plate. 12. Testing and quality controlWe documented how the product properties are tested in order to make sure the overlay plates fulfil the specified product properties. Including documentation on 3D party's quality system if calibration and testing is performed by 3D party. 13. Packing and loading  

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.