CIPDB › China Industry › Metallurgy, Mineral & Energy › Wear Resistant Material
High Alumina Ceramic Tiles Bonded Rubber Sheets Impact Panel for Wear and Impact Resistant1
Wear Resistant MaterialLinerLiner Panel
ZIBO QIMINGXING NEW MATERIAL INCORPORATED CO., LTD.
Preview:
Product Description High Alumina ceramic tiles bonded rubber sheets impact panel Product Description Rubber wear liner size: 500*500*6mm,500*500*8mm,500*500*10mm,500*500*12mmCeramic: Square tiles 17.5*17.5mm or 20*20mm 92 Alumina Ceramic LinersWEAR PLATE BACKING MATERIALSMild Steel Backing PlateAl2O3:≥92%Density:≥3.6g/cm3Porosity:<0.25compressive strength:≥1050MpaRockwell Hardness ≥85.5HRAVickers Hardness Hv20: ≥1050MpaFracture Toughness(KIC): ≥3.7MPa.m1/2Bending strength: ≥220MpaWear Volume:≤0.25cm3Appearance: whiteRubber:NaturalTensile strength(TSB):≥15MpaShore A Hardness: 55-60Thermal conductivity.(normal temperature): 2w/m·kAdhesive between Ceramic and rubber: 3.8MpaElongation: 468%Resilience:0.65 Steel: Q235A or Q235B Q235A: C 0.14-0.22% Mn 0.30-0.65% Si≤0.30 S≤0.050 P≤0.045Q235B: C 0.12-0.20% Mn 0.30-0.670% Si≤0.30 S≤0.045 P≤0.045 The rubber ceramic liner is made of excellent hot vulcanized rubber processing technology. The square or hemispherical wear-resistant ceramic liner and the vulcanized rubber are combined to produce a porcelain-vulcanized rubber composite wear-resistant ceramic vulcanized rubber sandwich panel. The rubber ceramic liner combines the high toughness of porcelain with the high buffering and fatigue-relieving characteristics of vulcanized rubber, which can effectively solve the problem of anti-corrosion of machinery and equipment during the whole process of mass and boring transportation. It combines the high toughness of porcelain with the advantages of high buffering and fatigue relief of vulcanized rubber, which can effectively solve the problem of anti-corrosion of machinery and equipment during the whole process of mass and uninteresting transportation.Also named wear ceramic parts, wear rubber ceramic plate, wear-resistant ceramic pads.Ceramic rubber composite pads&plate is the use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of the equipment with the adhesive paste. As customers' requirements, it also can be vulcanized together with steel plate, with bolts or not. Ceramic/rubber lining matsis a composite construction of highly wear-resistant 92 %-Al2O3 ceramic tiles (square, rectangular or hexagonal ?SW") vulcanized in special rubber with CN bonding layer. Area of application ? Lining against extreme wear through abrasion at high speeds ? For simple to medium duty applications in mining, gravel, sand and stone breaking mills and other industrial sectors ? In applications like pipelines, vibratory feeders, cyclones, skips, bunkers, chutes, loading points, slides, hoppers, silos Detailed PhotosMineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximized to minimize downtime. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. The slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is a constant risk of corrosion and dangerous leakage.Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders, and feed spouts or chutes. FAQ Q: Are you a trading company or manufacturer?A: We are a factory.Q: Is the sample free?A: Yes, we offer free samples. The sample air shipping fee will be returned when the bulk order. Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity. Q: What are your terms of payment?A: T/T 30% as the deposit, the balance against copy of B/L after shipment. Packaging & Shipping Company Profile 1. Established in 1997,20 years experience in wear solutions products.2. The factory is under expanding, the total construction area is 50,000 sqm.3.ISO9001:2000 certified,over 260 staffs.4. Three Own-designed production lines, the ball mils are own produced. Picture of workshop productionThe company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe. Certifications
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...