IPDB › China Industry › Instruments & Meters › Analysis Instrument
Pkt-Op110 Coulometric Sensor Method Oxygen Permeability Analyzer, ASTM D39851
Analysis Instrument, Gas Analyzer, ASTM D3985, Oxygen Permeability Analyzer, Oxygen Permeability Tester
Xiangtan Xiangyi Instrument Limited
Preview:
Product Description Introduction This product is based on the test principle of coulometric oxygen sensor, and is designed and manufactured with reference to ASTM D3985 and other standards. Adopting high-precision imported oxygen sensor, this tester has high test accuracy. It is suitable for the oxygen permeability test of films, sheets, papers, packages and related materials in the fields of food, medicine, medical devices, daily chemicals, photovoltaic electronics, etc. It provides high-efficiency oxygen transmission rate detection for a wide range of high, medium and low oxygen barrier materials.Test Principle PKT-OP1100 2.0 Oxygen Transmission Rate Tester adopts the principle of coulometric sensor method. The pre-treated sample is fixed in the middle of the test chamber, high-purity oxygen flows in the upper chamber of the film, high-purity nitrogen (carrier gas) flows in the lower chamber, oxygen molecules diffuse through the film into nitrogen on the other side, and carried to the sensor by the flowing nitrogen. And the oxygen transmission rate is calculated by analyzing the oxygen concentration measured by the sensor.Standard ASTM D3985, ASTM F2622, ASTM F1927, ASTM F1037, ISO 15105-2, JIS K-7126-B, DIN 53380-3, YBB 00082003Technical SpecificationsItemTechnical ParametersTest range0.01~1000 cm3/(m2·24h·0.1MPa) up to 260000 cm3/(m2·24h·0.1MPa) can be measured through the mask)Repeatability0.01 or 2%, whichever is largerResolution0.0001 cm3/(m2 ·24h ·0. 1MPa)Temperature control range15~45oCTemperature control accuracy±0. 1oCHumidity range0%RH ,5~90%RH, 100%RHHumidity Control Accuracy±2%RHPermeable area50.24 cm2 (custom fittings, down to 0.785 cm2)Sample sizeΦ100 mmSample thickness≤3 mmSample quantity1pieceItemTechnical ParametersCarrier gas flow5~ 100 mL/minCarrier gas pressure≥0. 1 MPaPneumatic pressure≥0.3 MPaDimensions380 ×625×386 mmPower450 WPower supplyAC 220 V ,50 Hz Application Factory configurationStandardconfigurationPower line, communication line, sample cutter, sealing grease, metal air tube,terminal ferrule joint, terminal ferrule joint, reference material, specialwrench, syringe, sealing ring, fork wrench, Phillips screwdriver, mouseOptionalComputer, measurement certificateUser provide1. Standard laboratory environment;2. Power requirements: 220V regulated power supply with three holes andthree positions with a switch socket;3. Computer requirements: standard configuration (Windows10, with anine-pin serial port);4. One bottle of oxygen, the purity must be above 99.999%, with a pressurereducing valve, and the output range is 0-0.4 Mpa;5. One bottle of nitrogen, the purity must be above 99.999%, with a pressurereducing valve, the output range is 0-0.4 Mpa.Note: Xiangyi Instrument(Xiangtan) Limited has always been committed to the innovation and improvement of product performance and function. For this reason, product technical specifications and appearance will be changed accordingly. The above situation will not be notified. The company reserves the right of modification and final interpretation.Service CommitmentFree packaging inspection technical support. - One-year warranty for instrument, free software upgrade service, and lifetime free technical support. - Free to the factory to train the operation of the instrument, qualified people issued graduation certificates, free accommodation and food. - Instrument "trade-in" policy and provision of backup instruments in case of failure. - There is a testing center (CNAS L8185) to provide incoming sample testing and sample data comparison services. - Set up a Reference Standards Development Center to provide calibration services.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.