IPDB › China Industry › Instruments & Meters › Analysis Instrument
Customizable Automatic Gas Flow Control Industrial Lab Gas Analyzer Modular Gas Chromatograph2
Analysis Instrument, Chromatography Spectroscopy Instrument, Modular Gas Chromatograph, Industrial Online Gc Analyzer
Jiangxi Aiyi High Tech Co., Ltd.
Preview:
Product Description Customizable Automatic Gas Flow Control Industrial Lab Gas Analyzer Modular Gas Chromatograph Product DescriptionThe AGC-7800 is a high-precision modular gas chromatograph designed for both laboratory and on-line industrial analysis. Equipped with intelligent flow control, multi-detector options, and advanced software integration, it provides exceptional accuracy, ease of operation, and remote monitoring capabilities. Product ParametersTemperature control accuracy0.01oCTPD99th level 100 platform (expandable)Hydrogen flame ionization detector (FID)detection limit≤ 1.1pg C/s (n-hexadecane)baseline drift(30min)≤2×10^-13Abaseline noise≤2×10^-14ADynamic linear range≥10^7Thermal conductivity detector (TCD)sensitivity≥12000mV.mL/mgBaseline drift (30 minutes)≤0.2mVbaseline noise≤0.05mVDynamic linear range≥105Flame photometric detector (FPD)LoDP ≤ 80fg/s (methyl parathion), S ≤ 8pg/s (methyl parathion)Dynamic linear rangeP≥103; S≥102Electron Capture Detector (ECD)radioactive source63NiLoD≤1.0×10-14 g/mL(γ-666)Dynamic linear range≥104Nitrogen phosphorus detector (NPD)LoDN: ≤ 1 × 10-12g (N)/s (azobenzene), P: ≤ 5 × 10-13g (P)/s (malathion)Dynamic linear rangeN≥103,P≥103 Detailed Photos Intelligent Gas Flow Control SystemHigh-precision mechanical valve ensures accurate and efficient daily analysis. Auto-ignition, flameout protection, and one-touch gas circuit control. Real-time pressure & flow auto-regulation with touch panel operation. Modular DesignEasily upgradeable - supports up to 4 detectors (FID, TCD, ECD, FPD, NPD). Innovative inlet liner structure for zero sample adsorption. Compatible with a wide range of sampling systems: Headspace, Thermal Desorption, Auto-Liquid Sampler. IBrainChrom WorkstationSupports simultaneous operation of up to 253 GCs on a single network.Strong data processing, audit trail, electronic signature, and GMP compliance.Built-in Modbus/TCP server for DCS integration with multi-threaded remote monitoring. Company Profile Jiangxi Aiyi High tech Co., Ltd., founded in 2015, is located in the picturesque Nanchang High tech Industrial Development Zone. We are committed to transforming the power of technology into an innovation engine in the scientific research community, providing excellent laboratory equipment and comprehensive technical support to global customers.Our main products cover five core areas: chromatographs, spectrometers, general instruments, laboratory furniture, and life science instruments. Chromatographs and spectrometers, such as high-performance liquid chromatography (HPLC), atomic absorption spectroscopy (AAS), inductively coupled plasma emission spectroscopy (ICP-OES), etc., stand out in industries such as environmental monitoring and materials science due to their excellent analytical capabilities and stability. Universal instruments, including high-precision pipettes, incubators, etc., ensure a perfect combination of precision and efficiency in every experimental operation. Laboratory furniture integrates modern design concepts and safety standards, providing researchers with a beautiful and practical working environment. Life science instruments, such as PCR instrument, gel imaging analyzer, etc., contribute to cutting-edge research in the field of life science. Packaging & ShippingWe attach importance to packaging protection and carefully design and optimize the solution: 1, sturdy and durable: use high strength and wear-resistant materials, such as high-quality cardboard boxes, foam, etc., to protect the goods in all aspects.2, Waterproof and moisture-proof: Designed with waterproof layer to protect the goods from moisture.3, Shockproof and cushioning: the internal filling is precisely calculated to both cushion and save space, ensuring stable transportation. 4,Environmentally friendly material selection: use recyclable or degradable materials to reduce environmental impact.Our Services To respected users: With your support and trust, in order to safeguard your interests and provide you with better and higher quality services, our company hereby makes the following commitments:1. Pre-installation Preparation The equipment we provide is brand new, unused, fully tested before delivery, and properly packaged for long-distance transportation. We will send the installation preparation requirements in writing 10-20 days prior to shipment. Once we receive your written confirmation for shipment, we will arrange delivery on time.2. Installation & Commissioning We will be responsible for on-site installation and commissioning until the system operates normally (for domestic orders). After successful commissioning, our senior technician (with over 3 years of experience) will provide user training on-site. The training will cover system operation, daily maintenance, safety notes, and basic troubleshooting to ensure your team can operate the instrument confidently.3 . Warranty & Support (Domestic Service Terms) We offer a 12-month warranty from the date of acceptance. During this period, we strictly comply with relevant national after-sales service regulations and provide standard "Three Guarantees" service (repair, replacement, refund) unless otherwise agreed in the contract. During the warranty period, for any equipment malfunction caused by product issues, we will respond within 24 hours and arrive at the site within 3 working days (within China). Repairs will continue uninterrupted until the issue is fully resolved. We have permanent or authorized service centers in China with experienced technical staff and sufficient spare parts to support year-round maintenance.4. For Overseas Customers We understand that international buyers may also require technical support and on-site service. Therefore: Remote installation guidance and online training will be provided free of charge via video conference, documents, and technical manuals. Overseas on-site services (installation, maintenance, training) are available upon request and may involve additional charges, depending on your region and service requirements. Please contact us in advance to discuss and customize your service plan. We are committed to being flexible and offering the best possible support according to your needs and budget.. FAQFAQ1. Can you do custom-made?OEM, ODM welcomed.1). Silk print your logo on the product.2). Customized Color Box.3). Design and produce based on your idea and draft. 2. What is your MOQ?1). Normally, if custmer need our brand or stick their brand, there is no MOQ.2). If customer need design new machine body, the first time MOQ is 30 pcs. 3. How about your payment?1). Amount less than $1000, you can pay for the order by Paypal, Western Union.2). Amount more than $1000, you can pay for the order by T/T, LC. 4. How about the shipping?1). For sample order, it would be sent by express company like UPS, Fedex, TNT ect.2). For bulk order, it would be sent by sea. We have our cooperation forwarder and you also can use your own forwarder. 5. How about deliery time?1). For standard sample or the quantity less than 10 pcs, the lead time is about 2 to 5 working days after payment.2). For bulk order, normally, it needs about 20 to 30 days, and it is based on your QTY. 6.How about your service?1). Any inquiries will be replied within 24 hours.2). Professional manufacturer, top-quality, competitive price.3). All products will be strictly quality checked and well-packed before delivery.4). If you order FCL and the broken more than 2%, we will replace you next time.5). If you have any questions, please feel free to contact me at any time.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.