IPDB › China Industry › Instruments & Meters › Analysis Instrument
Ultrasonic Spin-Spray Coater/ Lab Spin Coater/Ultrasonic Spin-Spray Coater Cy- Vtc-300uss1
Analysis Instrument, Other Analysis Instruments, Laboratory Coater, Automatic Rotary Coater
Zhengzhou CY Scientific Instrument Co., Ltd.
Preview:
Product Description Ultrasonic Spin-Spray Coater (300-3000 rpm, 12" Wafer Max) CY-VTC-300USSProduct DescriptionCY-VTC-300USS is a cost effective ultrasonic Spin-Spray Coater for liquid-phase, ultra-uniform coating process on a large substrate up to 12". The system consists of (1) a 12" spin coater with the vacuum chuck, (2) compressed air assisted ultrasonic spray nozzle mounted on a swing arm, (3) a heatable syringe pump, and (4) a heat lamp system for substrate heating.Specifications Features Combine the benefits of both spin and spray, enabling dense and uniform liquid-phase coating onto a large substrateApplications include low-temperature precipitation (e.g., for RF/microwave ferrites deposition), polymer coating, powder and composite material coating, and coating on a patterned / uneven substrateThe system also works on spin alone and spray alone modesSpin CoaterVacuum chunk with adjustable substrate holders for holding flat substrate up to 12" diameter or 8" squareOne oil-less pump for the vacuum chunk is included and controlled by the spin coaterSpin speed: 300 - 3000 rpm adjustableFor safety concerns, the speed is recommended to be limited to 2000 rpm for wafers larger than 8"Ultrasonic Spray NozzleOne ultrasonic generator with two ultrasonic sprays nozzles with compressed air shaper is includedTwo spray nozzles with the KF-25 adapter are included.One cylindrical type -- narrower spray ~20 mm diameterOne cone type -- wider spray ~40 mm diameterRecommended compressed air pressure for aqueous solution: ~2 psiOne flow meter is integrated for regulating and monitoring the compressed air flowFluid viscosity range: 1 - 50 mPa·s (cP)One swing arm for mounting ultrasonic spray head is built-in with adjustable speed and movement range Heatable Syringe PumpA heatable syringe pump with LCD touch screen control is included for delivering liquid to the ultrasonic nozzleOne 50 mL syringe is included for immediate use. The unit can accommodate syringe with 0.4 - 30 mm diameterPumping rate: 0.1 - 45 mm/min adjustable (0.08 mL/min - 35 mL/min for the included 50 mL syringe)Flexible Polyimide heater with 30 segments programmable temperature controller is built-in for heating up to 75 °C Heat Lamp and Control Duo heat lamps (1000 W max power. Up to 80 oC) with thermocouple and temperature controller can be ordered at extra cost for heating substrate by radiation (up to 65 oC with 12" metal substrate) Optional CY strongly suggests you to place the spin-spray coater inside a fume hood for health and safety concerns. The spin-spray system without heat lamp can fit intoCY's bench-top fume hoodA secondary ultrasonic spray unit can be ordered and mounted on the swing arm for co-deposition or co-precipitation processFor the above application, an independently controlled, two-channel heatable syringe pump can be ordered at extra cost to replace the standard syringe pumpVacuum Flash Assembly for DIY Vacuum Flash-Assisted Solution Process (VASP), Up to 5 mTorr is availableUtility RequirementPower: 208 - 240 VAC, 50/60 Hz, 3000 W in totalGas: ~2 psi compressed air for the ultrasonic nozzle. Air compressor is also available for order at TNNet Weight160 lbsShipping Weight & Dimensions#1: 423 lbs, 48x40x42"#2: 155 lbs, 48x40x35"ComplianceCE CertifiedWarrantyOne year limited with lifetime supportRusting and damage due to improper storage condition or maintenance are not covered by warrantyApplication NotesPicture on the left shows an example of spin spray coater complete configurationIt is the user's responsibility to understand the risks associated with the process and use proper protections. Solvents and chemicals used for the process may be poisonous, oxidizing, or corrosive. Spinning a large / heavy substrate at high speeds runs the potential risk of substrate flying out and shattering. User is advised to wear protective clothing, mask, goggles, and gloves. The process must be confined in a fume hood (Order at the Optional section) with proper exhaust handling capability. Keep the fume hood sash (window door) lower than the spinner stage during experiments.The film coating quality depends on the solution viscosity, substrate spin speed, substrate heating, and ultrasonic spray parameters, etc. User is advised to experiment the processing parameters for best resultsDo not overflush the water bowl/base with any kinds of liquid. Excess liquid will leak into the motor shaft and cause damage. Please use fabric cloth to wipe out the liquid residues in the bow/base. For more details about the cleaning procedures, please review the cleaning instruction for the spin coaters In order to achieve optimal coating quality, please consider cleaning the substrate with a plasma cleaner (Click the pictures below for more details) prior to coating. It will significantly reduce the surface tension on the substrates Reference ArticlesStrong Magnetoelectric Coupling in Ferrite/Ferroelectric Multiferroic Heterostructures Derived by Low-Temperature Spin-Spray Deposition Spin- and Spray-Deposited Single-Walled-Carbon-Nanotube Electrodes for Organic Solar Cells Rapid Assembly of Functional Nanocomposite Films Using Spin-Spray Layer-by-Layer ProcessingPackaging & ShippingOur Services1.We are a manufacturer so that we have the punctual delivery time.2.One sales representative serves you from inquiry to products shipped out.Communicate directly and conveniently.3.Professional R&D team.4.Strict QC.5.Smooth shipping.6.Rich experience. We do OEM services.Our customers are all over the world like USA, UK, Russia, Korea, Southeast Asia, etc. so that we are quite experienced.7.Certificate: All our products are CE approval.8.Fast reply: Our team will respond your requests within 8-working-hourContact us:Company addrees:No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, ChinaFounded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.Q. Are you a manufacturer or a trading company?A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.Q. How is your company's product after-sales service system?A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.Q. How long is your delivery time? If I want to customize the instrument, how long does it take?A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.Q. Our country's power supply and plug are different. How do you solve it?A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.Q. How to pay?A.T / T, L / C, D / P, etc., it is recommended to use Trade Guarantee.Q. How is the package of goods? Delivery methods?A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.More questions, please contact customer service
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.