IPDB › China Industry › Instruments & Meters › Analysis Instrument
Karl Fischer (KF) Titrator Moisture Meter by Volumetric Method (0.001-100.00%)1
Analysis Instrument, Moisture Meter, Water Content Tester, Karl Fischer Titration
Chongqing Gold Mechanical & Electrical Equipment Co., Ltd.
Preview:
Product Description Product DescriptionKarl Fischer (KF) Titrator Moisture Meter by Volumetric Method (0.001-100.00%)Introduction:The AKF-1 Volumetric Karl Fischer Titrator is produced by our company with independent intellectual property rights of the Volumetric Karl Fischer Titrator. The titrator adopts new mechanical and electronic design technology and humanized interface design, with reliable quality, wide measuring range (0.001-100.00%), high measurement accuracy, economic and practical, it can be used to accurately analyze crystal water, adsorbed water and free water in solid, liquid and gas samples.Volumetric Karl Fischer proceeds in the conventional manner of a classic titration, in that the titrant containing iodine is added mechanically to the solvent containing the sample by the titrator's burette.The most widely used standard methods based on volumetric KF are ASTM D1533 (Method A), D1744 and D4377. Volumetric KF is most accurate in the range of 500 ppm to 100 percent water.Product ParametersItemIndexDetermination methodKarl fischer volumetric methodMoisture content determination range0.001%-100% (water phase content)Accuracy of titration control0.001ml(20ml high precision burette)Measurement resolution1ppmLinear correlation coefficient of water titration≥0.998Polarization voltage adjustable range0~120mVSampling current accuracy0.1uAMeasurement repeatabilityRSD≤0.5%(20mg H20)Sample detection timeTens of seconds to several minutesMethod storage5Measurement results data storage100 pcsTitration subassembly20ml long life automatic buretteValve and pipeline materialTwo-way three-way electromagnetic drive control valve, anticorrosive material pipeline and sealing jointExternal electrodeDouble platinum sheet electrodeDisplay modeLCD screen (Chinese/English version selectable)Auxiliary settingAutomatic solvent absorption, waste liquid discharge, waste liquid bottle overflow warning, titration delay, end point delay, verification assistanceEnvironmental humidity≤80%Power supply110-240V/50 ~ 60Hz, 24V adapter, 72WGross weight5.5kgPrinterbuilt-inInstallation space450mm*400mm*400mm(including piping and three-hole bottle holder) Main Technical Features1.Fully closed system, titration cup, solvent bottle, reagent bottle are equipped with drying pipe, pipe joints and seals are made of corrosion resistant materials, to avoid environmental moisture infiltration, to avoid toxic reagents escape.2.The key operation instrument can perform the functions of metering tube cleaning, quantitative liquid feed, solvent absorption, waste liquid discharge, automatic titration,etc. It is suitable for all brands of Karl Fischer reagent, automatic solvent change and waste liquid discharge.3.The status light indicates whether the instrument is working and ready, the titration curve is dynamically displayed, and the calibration, sample measurement and test results are automatically saved.4.The instrument will automatically track the environmental water drift when idle, and select the drift deduction when calculating the results to ensure the accuracy of the analysis results.5.With user permissions management, support English and Chinese language switching.6.The instrument runs smoothly, the noise is low, the instrument measurement result format meets the GLP/GMP requirements.7.During the titration process, the feed rate is automatically adjusted according to the water content in the titration cup, and the feed volume, feed speed and electrode signal are displayed in real time. The measurement is simple, rapid and accurate; The self-developed high-precision metering tube can not only meet the titration accuracy, but also ensure a very low failure rate, which can meet the long-term continuous uninterrupted working environment. Detailed Photos Newly upgraded! The AKF-1 Volumetric Karl Fischer Titrator is produced by our company with independent intellectual property rights of the Volumetric Karl Fischer Titrator. It can be used to accurately analyze crystal water, adsorbed water and free water in solid, liquid and gas samples.Company ProfileContact usWelcome to contact us talk about details if you are interested in Karl Fischer (KF) Titrator Moisture Meter by Volumetric Method (0.001-100.00%).If you want to know more information,Don't hesitation, welcome your inquiry!Price can be negotiated! Website: chinainstrument.en.made-in-china.com
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.