IPDB › China Industry › Instruments & Meters › Analysis Instrument
Hay and Silage Samplers Replace Manual Sampling Tmr Forage Sampler1
Analysis Instrument, Sample Processor, Coarse Feed Sampler, Hay/Silage Sampler
Hornta (Langfang)Trading Co., Ltd.
Preview:
Product Description Coarse feed sampler ---- hay/silage sampler1. Product package size:46 * 33 * 15 cm (L * W * H) Weight: 6.4 kg2. Product configuration: Drilled pipe for silage: length 27cm, inner diameter 4cm, Drilled pipe for hay: length 40cm, inner diameter 2.8cm; 2×batteries; 1×hand drill; 1×standard charger; 1×sample unloading rod.3. Product Description Hay and silage samplers replace manual sampling, improve the stability, uniformity and reliability of sampling, reduce labor intensity, and improve the accuracy and automation of analysis and detection. It is suitable for easy sampling of alfalfa, oats, Leymus chinensis, weeds, silage, yellow silage and other roughages. It does not damage the physical and chemical properties of the materials, but also can sample accurately. The length is more than 25 cm. The matching power of the sampler is a 78 volt, 8000mAh charging wrench. One charge can continuously sample for 3 hours, more than 100 samples. The sampler is mainly composed of a motor and a sampling cylinder, and the head of the sampling cylinder is provided with a spiral cutting blade. When sampling, select the sampling point, press the power switch, the sampling cylinder will rotate accordingly, and the sample will continue to enter the sampling cylinder. Only a certain section of sample can be collected to complete the sampling of a certain section of depth. After sampling, release the power switch and take out the sampler.4. Compared with the prior art, this product has the following advantages: 1. It saves time and effort in hay sampling, not only does not damage the bale structure, but also facilitates multi-point sampling, and can effectively control the sampling depth and sampling volume; 2. The stainless steel sampler is tough and durable, small in size, light in weight, small in contact area with the blade, and less damaged, thus prolonging the service life of the sampler; 3. The discharge bar is set to facilitate the discharge of hay from the sampler after sampling. The seal ring is set between the discharge bar and the sampling cylinder to avoid the leakage of hay during sampling and unloading.Note: The sampler needs to add butter regularly for lubrication: after taking 1000 times, unscrew 4 screws of the drill head to add.Do not lose the connecting small pin.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.