IPDB › China Industry › Instruments & Meters › Analysis Instrument
Wholesale Electric Conductivity Monitor/ Conductivity Controller Sensor /pH Hour Meter1
Analysis Instrument, Liquid Analyzer, Conductivity Controller Senso, Conductivity Monitor
Hangzhou Haina Environmental Protection Tech Co., Ltd.
Preview:
Product Description Product Description The CM-230D Industrial Conductivity Meter is an upgraded product of our company's conductivity monitoring instrument, on the basis of maintainingthe original product performance,the digital circuit of single chip microcomputer is used for measurement and temperature compensation.This product iswidely used in on-line conductivity measurement and monitoring of water treatment equipment such as seawater desalination and wastewater reuse.It has thecharacteristics of convenient use, simple operation and perfect performance. Detailed Photos ModelAEC1-T2PrincipleTwo-electrodeDisplay RangeConductivity0.00~20.00 mS/cm Resistivity0.00Ω.cm~18.00MΩ.cmTDS0.00~10g/LSalinity15pptTemp.-10~150oCResolutionEC: 0.001μS /cm Resistivity: 0.01MΩ.cm TDS: 0.01mg/L Salinity: 0.01% Temp.: 0.1oCAccuracyEC: ±1% FS Temp.: 0.5oCRepeatability±0.3% FSTemp. CompensationAutomatic or manual (NTC10K or PT1000)Relay OutputTwo SPST relays, maximum load 3A/250VACSet high/low alarm, temperature and wash controlCommunication2-wire RS485 interface, MODBUS RTUSignal OutputTwo 0/4~20mA current, Max. load 1000ΩConfigurationPower failure protection, indefinite retention of parametersLanguageEnglishDisplay128*64 3.2-inch large graphic dot matrix LCDProtection GradeIP66Enclosure MaterialEnhanced ABSPower SupplyAC: 100~240V 50/60Hz or DC: 18~36VDimension100*100*120mm (hole size 92*92mm)Work Temperature0~60oC, RH<95%, non-condensingStorage Temperature-20~70oC, RH<55%, non-condensingInstallation MethodPanelPower Consumption3WMain Features of the InstrumentHas automatic range switching;With automatic zero calibration;With switching display temperature value;Panel input with cell constant;With conductivity value upper and lower limit alarm settings and control electric shock output;With alarm control delay setting;With isolated 4-20mA current signal output;
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.