IPDB › China Industry › Instruments & Meters › Analysis Instrument
MP-2m Semi-Auto Metallgraphic Specimen Grinding Polishing Machine1
Analysis Instrument, Sample Processor, Grinding Polishing Machine, Polishing Machine
Jinan Chenji International Trade Co., Ltd.
Preview:
Product Description MP-2mSemi-Autometallographic Specimen Grinding Polishing Machine With Double DiscsUsage and Features:This grinding and polishing machine is a double-disc machine, which can be operated by two people at the same time, and is suitable for pre-grinding, grinding and polishing metallographic samples. The speed of this machine is adjusted by the frequency converter, and the speed between 50~1000 rpm can be directly obtained, so that the machine has a wider range of applications. It is an indispensable equipment for users to make metallographic samples. This machine is equipped with a cooling device, which can cool the sample during pre-grinding to prevent damage to the metallographic structure due to overheating of the sample. The machine is easy to use and reliable, and it is an ideal sample preparation equipment for factories, research institutes and laboratories of universities and colleges.Main Specifications1. Working voltage: 380V 50HZ2. Diameter of polishing disc: φ230mm (203mm is optional), rotating speed 150-1000 rpm3. Electric motor: YSS7124, 550W4. Dimensions: 750×700×300mm5. Weight: 45kgMPT grinding and polishing head manual1. PurposeThe MPT type grinding and polishing head is a product suitable for use in the laboratory. It can be used for the preparation of one to three samples. It can use different pressures for each sample and can be equipped with an adjustable drip batching device.2. Technical parametersPower supply: 380V/220V 50HZ (Note: see the input voltage label)Speed: 50r/minForce acting on each sample: 0~40NNumber of samples prepared: 1-6Net weight: 15 kgInstallation and operation method1. Fix the bracket and the bracket seat on the base of the grinding and polishing machine;2. Place the grinding and polishing head on the support seat;3. Adjust the height and lock the handle to fix it;4. Lift the afterburner head piece (knob) and put the sample into the holder;5. Adjust the pressure of the sample: Adjust the knob to test the pressure of the sample, and tighten the locking handle on the upper part of the grinding and polishing head.6. Turn on the power of the grinding and polishing machine and the grinding and polishing head successively, and the grinding and polishing head will run with the grinding and polishing machine at a speed of 50r/min for grinding production.7. It is recommended to stop the machine to check the progress of the workpiece surface every 3 minutes during the grinding work. When polishing work, it can be extended to 5 minutes.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.