IPDB › China Industry › Instruments & Meters › Analysis Instrument
Touch Screen Intelligent Hot Metal Online Analyzer for Rapid Analysis of Carbon and Silicon Content in Front of The Furnace1
Analysis Instrument, Element Analyzer, Carbon Silicon Analyzer, Carbon Silicon Element Analysis
Nanjing Changyouyi Analytical Instrument Co., Ltd.
Preview:
Product Description Product DescriptionCYY-LK3 hot metal quality management instrument in front of furnace adopts thermal analysis technology to study the relationship between temperature change curve and its physical properties during metal solidification.It is a necessary instrument for fast analysis in front of furnace.carbon and silicon detection of hot metal in front of furnace, spheroidization rate analysis, adjustment and correction calculation of hot metal, touch screen operation and17.3 inch LCD display.Instrument composition and functionCYY-LK3 hot metal quality management instrument in front of furnace has built-in high-precision temperature transmitter, special industrial motherboard and industrial LCD display. The operation instructions are completed by touch screen operation or mouse operation. The measurement results can be output to the mobile memory through the high-speed USB interface and transferred to the office computer.Detailed Photosshipping list Serial numberProduct name Unit Quantity Remarks1Carbon, silicon and manganese analyzer in front of the furnaceset1main engine for carbon, silicon and manganese analysis2Sample cup holder and connecting lineset1The connecting line is about 4 meters long3Mouse, keyboard, USB flash driveset1The instrument has a USB interface to support automatic data saving and replication,(Touch screen operation)4Fixed carbon cupset1square cup or round cup is optional5High temperature hot metal special sampling spoonset1The ceramic fiber material can be reused6High temperature hot metal special slag removal spoonset1The ceramic fiber material can be reused7Instruction book and Certificate of conformityset1Paper or electronic operating manual Product Parameters1. Temperature transmitter: high precision temperature transmitter2. Thermocouple indexing: K type3. Accuracy grade: F.S±0.1%4. Temperature range: 0~1370oC ,(The analytical sampling temperature was around 1300oC)5. Main board: Customized professional industrial main board6. Display: 17.3 inch touch display7. Command input: photoelectric mouse, touch screen8. Record output: USB mobile storage9. Power supply: AC 220V 50Hz10. Measurement time: Results are available within 2~3 minutes11. Active CE carbon equivalent measurement range: 2.20-4.80%;12. Active C content measurement range: 2.00-4.20%;13. Measuring range of active Si content: 0.60-4.20%;14. Active CE, C%, Si% correction values can be set in (-0.99 - +0.99). Installation Instructions Installation and use method 1. Use a 220v power supply with a grounded triangular plug socket, and confirm that the power socket is correctly connected and well grounded! 2. Avoid installing the instrument in an environment with a strong magnetic field or electric field. 3. A series of data such as the carbon, silicon and manganese content of the molten iron can be measured by the furnace worker by the way, by pouring a small scoop of molten iron into the pouring cup.Measurement Process Description 1. First, plug the instrument into the power source, turn on the power switch, and warm up for 20 minutes before reaching the temperature equilibrium state. 2. After the sample cup is installed on the cup holder, the prompt box indicates "the sample cup is ready", and the instrument completes the measurement preparation, which can be used for hot metal quality measurement. 3. Ladle a ladle of hot metal into the sample cup. It is suggested that the temperature of hot metal in the sample cup should be about 1300 oC, and the instrument will automatically enter the measurement state. The prompt box indicates that "the determination of liquid iron composition is in progress", and the temperature curve area on the left begins to display the temperature curve measurement process. 4. On the right side of the measurement screen, the calculated measurement results, CEL,C%,Si%,and the quantity of scrap, carburizer and ferrosilicon to be adjusted are displayed in turn. 5. After the measurement, the results will be displayed, and the results will be saved automatically. The measurement status prompt box will prompt "please remove the high heat sample cup" Application fieldCompany Profile
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.