Acrel ACR10r-D36te Max 300A for Solar System Single Phase Multifunction Power Meter LCD Display¹

Product Description  ACR10R Bidirectional Single-phase Solar Pv Energy Meter with External CT(Note: The meter can match to Solis Inverter to solar power zero export, if it is used for the Solis Inverter)Product Description        Measurement: 1-phase Active Power, Reactive Power, Current, Voltage and etc15 Kwp availableCurrent Rating: Diameter 10mm,80A (paired with external CTs)Diameter 16mm,120A (paired with external CTs)Diameter 24mm,200A (paired with external CTs)Diameter 36mm,300A (paired with external CTs) Communication: RS485 (MODBUS-RTU) Application: Using distributed Solar PV and Anti-reflux Inverter Display: LCD Display Installation: 35mm DIN Rail Power Supply: 85~265V AC or 100~350V DC Standard&Certificate: CESingle phase LCD din rail energy meter with 36mm split CT enabled cable 300A input. It is suitable for power monitoring of grid-connected PV power stations, power management, and so on. It is easy to install without removing the primary bus bar and is cost-effective. It can measure current, voltage, active power, reactive power, frequency, power factor, and so on. It supports multi-tariff energy metering, 4-quadrant energy metering, and so on. Detailed Photos Features       Used for distributed Solar PVReflux Monitoring Bidirectional Metering Active Energy Metering Reactive Energy MeteringRS485 Communication MODBUS-RTU Protocol Communicate with Inverter to realize anti-reflux Function Single-phase Two-Wire Connection Paired with external split core CT Rated Voltage: AC 100V, 400VLCD Display Parameter Display Programming InterfaceKeypads HMI for Programming Parameter Display Setting Communication(address, baud rate and etc.) Product Parameters Technical parametersIndicators       InputGridSingle-phaseFrequency45~65Hz  VoltageRated voltage: AC 100V, 400VOverload: 1.2 times the rated voltage(continuous); 2 times the rated voltage lasting for 1 secondPower consumption: less than 0.2VA  CurrentRated current: 10A,20A,40A,80A,120A,200A etc. (for details see product specifications)Overload: 1.2 times the rated current(continuous);10 times the rated current lasting for 1 secondPower consumption: less than 0.2VA OutputCommunicationRS485 interface, Modbus-RTUDisplayLCDMeasurement precisionVoltage: 0.2 level, current, power Active energy: 0.5 level,0.01Hz frequency, Reactive energy: 1 levelPower supplyAC85~265V or DC100~350V; power consumption ≤10VA  SafetyPower frequency withstands voltageAC2kV 1 min between power supply // current input//voltage input and communication AC2kV 1 min between each pair of combinationsamong power supply, current input, and voltage input.Insulating resistor Input, output terminal to housing >100MΩEnvironmentWorking temperature: -10oC~+55oC;storage temperature: -20oC~+70oCRelative humidity:5%~95%,non-condensing; altitude:≤2500m Wiring ChartDimension Solution Company Profile 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.