CIPDB › China Industry › Instruments & Meters › Heating, Refrigeration & Temperature Control
High-Efficiency 1000 Liters IBC Immersion Heater From China1
Heating Refrigeration Temperature ControlIBC Immersion HeaterImmersion Heating
JPCI Controls (Foshan Gaoming) Co.,Ltd
Preview:
Product Description Product DescriptionJPCI Type 9SWR2, 1000 liters IBC Immersion heaterThese immersion heaters are mounted on the filling hole of the bulk containers of 1000 liters or more. They simply land on this hole, thanks to a stainless steel cup that covers the thread, while maintaining a connection to atmospheric pressure. Their long non-heating part makes it possible to position the heating coil at the bottom of the container. The surface load of the heating element is 3W/cm2, so that it can be used in aqueous liquids as well as in oils and greases. The stainless steel construction of the housing and of the heating element allows use in industrial and food processing environments. In the internal access models the IP69K ingress protection allows the washing with hot water under pressure. The temperature control is done in the center of the heating coil. A safety is installed on the top of the coil, to automatically turn off the heating when the decrease in the level of the heated product puts the coil in contact with the air. These immersion heaters can be used alone in reheating, with or without insulating jacket, or in addition to heating jackets, in the latter case, they greatly reduce the heating time. Fitting material: 304 stainless steel cup, dia. 170mmEnclosure: 125 mm x 125 mm, 85mm height, 304 stainless steel. Silicone gasket. Stainless steel cover screws.Ingress protection class with outside access: IP54Ingress protection class with inside access: IP69KTemperature control: by 30-90°C (85-195°F) bulb and capillary thermostat. Other temperature ranges available. See options hereunder.Dry run safety: By manual reset bulb and capillary thermostat, fail safe, controlling the heating element surface temperatureCable gland: M25, PA66.Thermowell: Two thermowells in AISI304, dia.10 mm x 8.4mm for temperature control and dry run safety.Power supply connection: Rubber insulated cord, 3x1.5mm2, with euro plug. Ul plug on request.Immersed zone: 800mm.Surface load: 3 W/cm2, others values on request.Voltage: Single pole 230VStandard equipment: - Adjustable thermostat- Large size (dia. 16mm) green and red LED pilot lights, on the enclosure side- Dry run manual reset safety: preset at 100°C (212°F). Variants on request: - Internal thermostat adjustment and manual reset access under screwed M25 cap.- Thermostat ranges 4-40°C (40-105°F), 0-60°C (30-140°F) or 30-110°C (85-230°F)- Other dry-run safety temperature setting.With 30-90°C (85-195°F) thermostat external knob, and external manual resetat 100°C (212°F)With 30-90°C (85-195°F) thermostat internal knob, and internal manualreset at 100°C (212°F) 9SWR2JRT0302680N9SWR2JRS0302680N Packing&ShippingCompany IntroductionCompany profile:Established in China since 2000, with French technology and investment, our company is proud to have more than 60 years experience in manufacturing electromechanical components and 30 years experience in manufacturing safety component for Spas, swimming pools and hot tubs. This experience, combined with high tech equipment and high tech raw materials let us develop the new components needed by rapid expansion of Asian and Chinese market.In our new factory, on more than 8000 square meters production lines, we have two manufacturing divisions:Division one is producing components:Thermostats, energy regulators pressure switches, level switches, flow switches, fire detection fusible links, heating elements and ceramic connection blocks.Division two is producing complete assemblies and sub assemblies on customer specifications:Swimming pools heaters, heat pumps backup heaters, spas heaters, small water heaters, immersion heaters, aluminum foils heaters, baseboard and convection heaters sub assembliesOur R&D team develops new products upon customer specification, taking care of international safety standard (UL, CE, etc.).We produce our own stamping, bending, plastic injection, zinc alloy injection, and machining.We are equipped with up to date automatic and CNC TIG welding and laser welding equipment and ultrasonic welding checking.We have our own climatic room, corrosion testing loops, salt spray testing, and more than 30 specific equipments for products life testing.Our income quality control laboratory is equipped to check raw material (plastics, metals) physical characteristics and dimensions.Our finished product control laboratory has more than 200 machines to calibrate and check temperature, pressure, level and flow controls.From the raw material to the finished product we control every production step. Meet your control equipment demand rapidly and safely is our consistent promises.Basic Information Product/Service Sell: Flow switches, level switch,pressure switch, thermostat,heating elements, back up heaters for heat pumpsNumber of Employees:200 to 300 PeopleMain Markets:North America/South America/Eastern Europe/Southeast Asia/Africa/Oceania/Mid East/Eastern Asia/Western/Europe/Northern Europe/Southern Europe/Domestic MarketTotal Annual Sales Volume: US$2.5 Million - US$5 MillionExhibitionDomestic : China Heat Pump Exhibition ,Shanghai city , 15th-17th March every year Oversea : It depends,normally in Europe,
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...