CIPDB › China Industry › Instruments & Meters › Electrical Control System
Sm-etc-Mes Nidec Control Techniques Option Module1
Electrical Control SystemSm-etc-MesSi-Ethernet
China One-Tone Industrial Group Co., Ltd
Preview:
Product Description SM-ETC-MES Nidec Control Techniques Option Module SI-ETHERNET Nidec Control Techniques Option Module 82400000017900Control Techniques - 82400000016500 SYSTEM INTEGRATION MODULES - APPLICATIONS SI-APPLICATIONS PLUS FOR M700Nidec Control Techniques SI-UNI-ENCODEREncoder feedback module for Unidrive M600 - M700The SI-Universal Encoder enables additional formats to be used that could not otherwise be supported by the single 15 pin connector. They also provide Closed loop Rotor Flux Control for induction motors (RFC-A).UNIVERSAL SI ENCODER 82400000018100 Nidec Control Techniques M600 M700Control Techniques SI-Encoder ModuleSI-Encoder has an incremental encoder input to provide Closed loop Rotor Flux Control for induction motors (RFC-A) on M600 and an additional encoder input on M700.Features include: Supports AB quadrature encoders without marker pulseThe SI-Universal Encoder enables additional input and output formats to be used that could not otherwise be supported by the single 15 pin connector. They also provide closed loop rotor flux control for induction motors (RFC-A).Support for:SinCos with communicationsSinCos with or without commutationQuadrature incremental with or without commutationPulse and directionSSI and EnDatThe module also provides a simulated encoder output that can be programmed to operate in the following modesQuadrature incrementalPulse and directionSSIThe module also incorporates high speed inputs for position capture.Drive compatibility Unidrive M600Unidrive M700Digitax HDElevator Drive E300Pump Drive F600PROFIBUS-DP (Decentralized Peripheral) interface module enables follower connectivity. It is possible to use more than one SI-PROFIBUS or a combination of SI-PROFIBUS and other option modules to add additional functionality such as extended I/O, gateway functionality, or additional PLC features. CT SI-PROFIBUS Adapter for Unidrive M and Commander C82400000017500 (SI-PROFIBUS)Nidec Control Techniques PROFIBUS communications adapter for Unidrive M and Commander C size 2 and above.The module is designed to be installed in the module slot located under the drive cover. It is not compatible with M100, M101 or frame size 1 drives.Other Unidrive M modules are available.Manufacturer part number is 82400000017500, SI-PROFIBUS.Drive CompatibilityThe compatibility table below highlights which Control Techniques drives support this option module CommanderCommanderUnidriveUnidriveUnidriveDigitaxC200C300M400M600M700HD√√√√√√SI-PROFINET-V2 allows the drive to communicate and interface with PROFINET PLCs and networks.Features include:Dual 100 BASE-TX RJ45 connectors with support for shielded twisted pair, full-duplex 100 Mbps connectivity with auto crossover correctionIntegrated switches allow for use of line networks i.e. daisy chainingBoth ports operate in full duplex mode as a network switch PROFINET Real-time class RT_Class_1 and conformance class ACycle times from 2 ms to 512 ms specified during configuration Automatic device replacement using the LLDP and DCP protocolsLED indication of network port activityUp to 64 cyclic I/O module slots (maximum of 32 in and 32 out) configured by network configuration tool and GSDML file Identification and maintenance functions I&M0 to I&M4 supported
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...