CIPDB › China Industry › Instruments & Meters › Heating, Refrigeration & Temperature Control
Air Source Water Heaters Titanium Pool Heater Commercial Swimming Pool Heat Pump1
Heating Refrigeration Temperature ControlSwimming Pool Water Heating Cooling SolutionCommercial Pool Heat Pump
Guangdong Luckingstar New Energy Co., Ltd.
Preview:
Product Description Product DescriptionON-OFF commercial swimming pool heat pumpLuckingstar Commercial Pool heater series unit is the world's leading new type of pool constant temperature heating equipment, it uses the original constant temperature technology and efficient titanium alloy heat exchanger, absorb low-grade heat energy in the air, to heat or maintain the pool temperature, completely breaking the pattern of relying on non-renewable energy to heat. Effectively improve the safety and flexibility of swimming pool heating and constant temperature, widely used in villa (family) swimming pool, spa club swimming pool, large swimming pool and other places.Feature1. WIDELY USEDThe Commercial Pool heater heat pump effectively improves the safety of the swimming pool heating constant temperature. It is widely used in villa (family) swimming pool, spa club swimming pool, large swimming pool and other places.2. Constant temperatureSmall temperature fluctuation, precise control of water temperature.3.Core componentCompressor:Using the famous brand of EVI technology compressor, reliable operation at -30oC low temperature environment, strong heating.When the outdoor temperature is very low, the heat exchange capacity of the outdoor unit is reduced, the return volume of the normal air return port of the general compressor is reduced, and the compressor power is reduced, and the best effect cannot be achieved. However, by supplementing the cooling gas through the intermediate pressure return air jet, the exhaust volume of the grain wheel compressor is increased, the circulating refrigeration dose of the indoor unit heat exchanger heating is increased, and the actual heat is increased. Therefore, it is more suitable for cold areas.Titanium heat exchanger :It is a kind of heat exchange equipment made of high quality titanium pipe to transfer part of the heat of the hot fluid to the cold fluid, because of its excellent properties of strong corrosion resistance, so the service life of the heat exchanger is long, and the maintenance cost is less in use.Eco-friendly refrigerant: Using of R410 refrigerant, no exhaust gas, waste water, waste residue discharge during the operation of the unit, friendly to the environment.Fin heat exchanger: Fin heat exchanger consists of annular return air design, high utilization rate, large windward area; The upper and lower structure of the heat pump unit is separated to achieve a good working temperature in each area of the unit, which improves the heat transfer effect of the evaporator and inhibits the generation of noise3. MULTIPLE NOISE REDUCTION- New structure and pipeline optimization design, effectively avoid internal pipeline tremor.- The special heat pump compressor is used, and the external sound absorbing cover is fully sealed.- The structure and parts of the main engine are treated with sound absorption technology.- Low noise anti-tremor axial flow vane design.- The design of the special compound shock absorber plate has better effect of shock absorption and noise reduction.4.Intelligent Remote Control TechnologyThe Commercial Pool heater heat pump can be interconnected with mobile phones, computers and other equipment to realize multi-online remote control, real-time monitoring of the remote operation status of the unit, and at the same time has the functions of intelligent remote power on/off, parameter setting, fault detection, fault alarm, etc., which is not only convenient for management but also can reduce the cost of employment.5.Complete modelUnit model specifications are complete, suitable for various sizes of home, villa, commercial swimming pool. For large swimming pools, modules can be assembled according to the actual load size.6.Modular Design And Flexible InstallationAccording to the site characteristics of the installation site, a variety of combined connection methods can be selected, which can realize the parallel use of multiple unit modules to meet different needs.The compressor starts in stages, runs in a balanced manner, and reduces the impact of the starting current of the unit on the power grid.7.Energy efficient, save moneyThe use of heat pump technology, the unit directly heating pool water, the annual average energy efficiency of more than 5.0, compared with the traditional boiler + plate heat exchanger heating method, the operating cost can save 70%-80%.8.Safe and reliableWater and electricity isolation, no combustion, no leakage, no leakage, no pollution, greatly reduce the risk of electric shock, poisoning, explosion, safety and environmental protection.9. Unit durabilityBuilt-in double process titanium coil heat exchanger, effective resistance to corrosion, so that the life of the unit is fully guaranteed.Water and electricity isolation, no combustion, no leakage, no leakage, no pollution, greatly reduce the risk of electric shock, poisoning, explosion, safety and environmental protection.10.Multi-defrosting TechnologyThe multi defrosting technology of the heat pump makes the heat pump unit defrost quickly, and completely eliminates the hidden danger of frost water accumulation into ice.Commercial pool heat pump system installation connection diagramProduct ParametersModel LWH-030SCLWH-050SCLWH-100SCLWH-150SCLWH-200SCLWH-250SCLWH-300SCLWH-400SC Heating capacitykW13. 522.845.768.691.5114.5145190 BTU/h4600077800155900234100312300390800494900648500 COP 5.625.75.575.75.715.725.75.8 Cooling capacitykW8 213.530.045.060.075.090.0120.0 BTU/h2790046000102400153600204800256000307200409600 EER 3. 043.143.133.003.003.003.053.07 Powwer supply 220V/1N/50Hz380V/3N/ 50H Heating input powerkw2.44.08.212.016.020.025.432.7 Cooling input powerkw2.74.39.615.020.025.029.539.0 Heating input currentA11.07.214.721.528.635.845.458.5 Cooling input currentA12. 37.217.226.835.844.752.769.7 Compressor type Scroll*1Scroll*2Scroll*4Compressor brand CopelandThrottle type Emerson thermal expansion valve / Electronic expansion valve(EEV)Fan type Low noise high e?ciency axial typeFan direction HorizontalVertical Fan No. 11222244 Fan input powerW90250250550750750750750 Fan SpeedRPM750250850910940940940940 Evaporator ?n type Hydrophilic aluminiumEvaporator tube type Innergroove tubeHeat exchanger ype Titanium in PVCHeat exchanger No. 124Controller type Intelligent & LCDAmbient Temperature (-10°C~+45°C)Refrigerant R22/R417A/R410AVR407CLow pressure protection YesHigh pressure protection YesAutomatic defroting system YesOverioad protection YesNoise in 1 metérdB(A)≤54≤56≤60≤65≤66≤68≤71≤72 Water pipe sizemm505063639090110110 Water ?ow volumem3/h46131925334154 Cabinet power coated steel / Stainless steelUnit Sizemm1110x470x680860x840x11201148x815x11701585x850x15252006x1006x19602010x1165x20352010x1165x20352120x2006x2110 Packing Sizemm1140x495x790910x910x12601610x905x13101690x940x17502120x1160x21202120x1265x21802120x1265x21802200x2100x2250 Net Weightkg681252704606507509001100 20'/40"/40" HQSet44/92/13812/24/486/13/136/13/135/11/114/9/94/9/92/5/5 Company ProfileGuanadong Luckingstar New Energy Co., ltd, as one of the top 10 heat pump brands from China, has beendedicated to producing high-qualitly heat pumps since its establishment in 2006. Luckingstar heat pumpfactory covers an extensive area of 75,000 square meters and is equipped with 7 automatic production lines.This substantial infrastructure enables to achieve an annual production capacity of around 500,000 units of heatpumps. Luckingstar places great importance on ensuring the quality of their products, Luckingstar haveestablished 5 professional performance test laboratories specifically desianed for air source and water sourceheat pumps, These state-of-the-art laboratories are capable of operating in extreme temperatures as low as-41.5°C and have a capacity range of 1 to 500 kw.Thanks to the unwavering commitment to quality,Luckingstar heat pumps have gained popularity worldwide and have been successfully exported to more than40countries including Europe, Asia, Africa ,Australia and America etc.areas.Q: Who are we?A: We are a professional heat pump manufacturer with R&D, lf you are looking for a lead-ing heat pump supplier, please contact us immediately!Q: can you do OEM/ODM/OBM?A: Yes, we can do OEM / ODM /OBM which depends on your requirement , we are familarwith all kinds of cooperations. Q: What's your MOQ?A: For official orders, our MOQ is a full container load of 40-foot container.Q: What's your lead time for orders?A: For samples ; 10-20days ; For mass orders: 30-35 days to be discussed.Q: What's the payment terms?A: Normally by T/T,Samples/LCL orders: 100% paid before production;Mass orders: 30% down payment, balance paid beforeshipment.Q: What's your production capacity?A: Inverter Swimming Pool Heat Pump: 150-300pcs/production line/dayInverter Space Heat Pump: 100-200pcs/production line/dayDomestic Hot Water Heat Pump: 150-300pcs/production line/dayCommercial Heat Pump: 30-100pcs/production line/dayQ: How long is your warranty?A: 24 months for complete units, 36 months for main components like compressors, heatexchangers.3-5year warranty is available with added cost.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...