Small Lamp Holder Copper Fitting (Educational equipment)¹

Product Description Product DescriptionSmall lamp holder ( Educational equipment )Product IntroductionThe small lamp holder is composed of a base plate, a wiring post and a lamp holder.The small lamp holder is a socket and screw dual-purpose lamp holder, which is equipped with small electric balls such as E10/13, E10/14, 1c9/14 and Ic9/14.There are two mounting holes with diameter of 4.5 on the base, and the center distance of the holes is 40 ± 0.5 mm.Product Specification Product nameSmall lamp holderMaximum operating voltage36VMaximum operating current2.5AMaterialPlastic & MentalSize74x35x23.5mmProduct feature and applicationThis instrument is designed according to the requirements of the teaching textbook, and can be used in the circuit test of middle schools.Maintenance and precautionsa. The small lamp holder shall be used under the test conditions with the maximum working voltage of 36V and the rated working current below 2.5 A.b. If the lamp holder is found to have deformation or surface oxidation, it cannot be used again, and it should be replaced with a new one.c. When not in use, it should be put in dry, non corrosive gas, and can be used normally next time.Detailed Photos Company ProfilePackaging & ShippingFAQ

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.