Pneumatic Mining Monorail Track-L140e Curved/Straight Rails, Q355b Material, High Stability¹

Product Description Detailed PhotosProduct IntroductionThe pneumatic monorail crane is driven by compressed air to push the gas motor to rotate at high speed, and after changing the speed (reducing the speed) to increase the torque, it drives the driving clamping wheel to rotate, crosses along the elevation of the hanging rail, and can travel with the track horizontally, turning, and pitching up and down. The components of the equipment are: traction device, bearing car, pneumatic reed, brake device, pull rod and other parts.The traction equipment is equipped with pneumatic driving device, which suspends the goods on the load-bearing trolley, and the equipment can carry out short-distance load-bearing operation along the 1140E, 1140V or their improved suspension rails in the roadway. The driving of the equipment is realized by two driving motors, and the driving motors stop immediately when the high-pressure air is stopped.The device is controlled by an operating handle or a remote control device, two control modes.Because of the configuration of 4 motor and 4 reducer, the braking force of the equipment in downhill operation is improved, the speed of the equipment in downhill operation is more stable, and the safety factor is greatly improved.The equipment adopts the mode of common driving at both ends, which can flexibly adjust the hoisting position of the hoisting items, and can realize multi-point hanging.Because the equipment adopts the dual-host driving mode, two groups of energy storage systems are added, so that the braking effect of the equipment is better and better during operation Reliable.Product advantageCompact structure, good passing performance, low failure rate and convenient maintenance;The control system adopts wireless explosion-proof over-control, which has high safety;Set up multiple protection systems to ensure the safety of equipment and personnel;Simple operation, reducing the labor intensity of workers;Energy saving and environmental protection, no pollution to the environment such as waste gas, waste liquid, and noise;DQ30/0.5, DQ25/0.5, DQ20/0.5Product introductionWhen the goods are suspended on the load-bearing trolley, the equipment can carry out short-distance load-bearing operation along the 1140E type or its improved suspension rail in the roadway.The drive of the device is realized by two lookout motors, and the drive motors stop immediately when the high pressure air is stopped.DQ50/0.5(A)Equipment compositionThe equipment consists of a traction main engine (four instant wheels), a failure brake device *2, Carriage, connecting device, pneumatic grape * 2 (10 tons), etc.DQ60/0.5Equipment compositionTraction main engine (four drive wheels), dual braking device, single braking device, Carriage, connecting device, pneumatic grape * 2 (10 tons), etc.DQ80/0.5,DQ100/0.5(Y) DQ120/0.5(Y) Equipment compositionTraction main engine (four drive wheels), dual braking device*2, pneumatic grape * 2 (10 tons), Carriage,connecting device,etc.Product ParametersDQ50/0.5,DQ40/0.5Main  technical  parameters1 ModelDQ50/0.5DQ40/0.52 Rated tractionpressure 0.4MPa≥40≥30pressure 0.5MPa≥50≥40pressure 0.6MPa≥55≥453 Speed[m/s1]0.4 0.4 4 pneumatic motorModelAMC5AMC4Power4X54X4Air consumptionm3/min]4X3.54X35 Pneumatic hoistModelHQ10-(3~16)Power2X4.5Air consumption[m3/min]2X4.36 Work pressure[MPa]0.4-0.67 Max climbing angle[°]0~208 Min horizontal turning[m]4 9 Min vertical turning[m]8 10 Vehicle(I×WXH)[mm]6000*747.5*77211 Vehicle weightKG1700 12 Start wayElectric start/hand crank13 Rail model1140E or 1140VSlope Load TableNO.Ramp  gradient(°)0°5°10°15°18°20°1DQ50/0.5load(T)201715131082DQ40/0.5load(T)2015111086Note:  Does  not  include  self-weightDQ30/0.5,  DQ25/0.5,  DQ20/0.5Main  technical  parametersProduct modeunitPressureDQ30/0.5D025/0.5D020/0.5Rated tractionKN0. 4MPa≥23≥20≥150. 5MPa≥30≥25≥200. 6MPa≥35≥30≥25Driving speed[m. s']0.4Work pressure[Mpa]0.4-0.6Max climbing angle[0]0~15Vehicle (L*W*H)[em]4600*740*880Vehicle weightKG1.2Minimum horizontal turning radius[m]5Min vertical turning radius[m]10Rail model1140EStart wayElectric start/hand crankpneumatic motorModelAMC5Power[Kw]2X5consumption[m3/min]2X3.5Pneumatic hoistModelHQ5-3Power[Kw]2X3.6Model:  DQ50/0.5  (A)Main  technical  parametersNO.NameBasic parameter1Rated tractionPressure 0. 4MPa≥40Pressure 0.5MPa≥50Pressure 0.6MPa≥552Speed[m/s]0.43Pneumatic motorPower [KW]2X7Emission[m' /min]2X4.24Pneumatic hoistPower2X5.5Emission[m /min]2X3.55Work Pressure[MPa]0.4-0.66Max climbing angle[° ]0~57Min horizontal turning radius[m]48Min vertical turning radius[m]89Max lifting weight[T]2010Vehicle (1XWXH)[mm]6000*750*85011Vehicle weightKG1 30012Start wayElectric start/hand crank13Rail model1140E/I140VSlope Load TableRamp gradient(° )0°5°1015°18°DQ50/0.5load (T)2017151310Note: Does not include self-weightDQ60/0.5Main  technical  parametersNO.NameBasic parameter1Rated tractionPressure 0.4MPa≥5Pressure 0.5MPa≥60Pressure 0. 6MPa≥652Driving speed[m/s' ]0.35 pneumatic motorPower [KW]2X7Emissions [m/min]2X4.24Number of driving partsSet15Number of brake partsSet36Vehicle (1XWXH)[mm]6938X747.5X8527Vehicle weightKG16008Max lifting weight[T]10+10 Pneumatic hoistPower [KW]2X5.5Emissions [m/min]2X3.810Work pressure[MPa]0.4-0.611Max climbing angle[°]0~2512Min horizontal turning radius[m]413Min vertical turning radius[m]814Start wayElectric start/hand crank15Rail model140ESlope Load Table Ramp gradient(°)0°5°15°18°D060/0.520181411Note: Does not include self-weightDQ80/0.5,DQ100/0.5(Y)  DQ120/0.5(Y)  NO.NameD080/0.5D0100/0.5(Y)D0120/0. 5(Y)1Rated tractionPressure 0.4MPa≥75≥95≥115Pressure 0.5MPa≥80≥100≥120Pressure 0.6MPa≥85≥105≥1252Driving speed[m/s-1]0.40. 160.163pneumatic motorModelAMC5.5AMC7AMC7Power [KW]4X5.54X74X7Emissions[m3 /min]4X3.84X4.24X4.24Number of driving partsSet25Number of brake partsSet4346Vehicle (L×W×H)[mm]8220X747.5X8527558X 747.5X8507658X747.5X 8507Vehicle weightKG2000210022008Max lifting weight[T]10+10 Pneumatic hoistPower [KW]2X5.5[m/min]2*3.810Pressure[MPa]0.4-0.611Max climbing angle[°]0~1512Min horizontal turning radius[m]413Min vertical turning radius[m]814Start wayHand crankHandle control + remote controlHandle control + remote control15Rail model1140E1140E/1140V1140E/1140VProduct DescriptionOur AdvantagesCompany ProfileShandong Ruilisitong Rail Equipment Manufacturing Co., Ltd. was established in March 2020 with a registered capital of 50 million yuan.The company mainly engages in the processing and sales of industrial and mining accessories. The company is located in Zoucheng, the hometown of the historical and cultural ancient city of Mencius, covering an area of over 13300 square meters, with a building area of 10000 square meters and fixed assets of over 70 million yuan. The company currently has over 70 employees, including more than 20 professional and technical personnel, providing strong technical support for product design and manufacturing. After years of practical application and continuous exploration and development, various equipment and ancillary facilities for the monorail crane assisted transportation system have been developed. Its unique design concept, excellent quality, exquisite manufacturing process, and stable and reliable operation have received high praise from customers. The company has excellent inspection equipment, advanced mechanical processing technology, production equipment processing capability, complete quality management system and environmental management system. Its products are widely used, mainly in industries such as mining auxiliary transportation, and have received high praise in the same industry.Exhibition displayCertificationsFAQQ:Who Are We? A:We Are Based In Shandong, China, Start From 2022,Sell To Northern Europe(20.00%),Africa(20.00%),South Asia(20.00%),South America(20.00%),Central America(18.00%),Southeast Asia(2.00%).There Are Total About 51-100 People In Our Office.Q:How Can We Guarantee Quality?A:Always A Pre-Production Sample Before Mass Production; Always Final Inspection Before Shipment.Q:What Can You Buy From Us? A:Tramcar,Flatbed Truck,Chain,Scraper,BoltQ:Why Should You Buy From Us Not From Other Suppliers? A:We Are Factory Direct Sales And Can Provide Better After-Sales Technical Support To Reduce Your Worries. Q:What Services Can We Provide? A:Accepted Delivery Terms: FOB ,CFR ,CIF ,EXW ;Currency: USDAccepted Payment Type: T/T,L/C,Credit Car,Western Union,Cash ;Language Spoken:English,Chinese,Spanish,Japanese,German,French,Russian Korean;

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.