CIPDB › China Industry › Manufacturing & Processing Machinery › Stone Processing Machinery
Zenith High-Efficiency Hydraulic Cone Crusher (HPC-220)1
Stone Processing MachineryCone CrusherHydraulic Cone Crusher
Shanghai Zenith Mineral Co., Ltd.
Preview:
Product Description Introduction of High-Efficiency Hydraulic Cone Crusher This cone crusher of HP series, combing the technology of single-cylinder cone crusher and PY cone crusher is of a new type by adopting the advanced and optimized design concept. Owing to the use of better crushing frequency and eccentric distance, the percentage of fine graininess is much higher, and the content rate of the granularity smaller than the discharge opening on closing edge may reach 80%. As a result the handling capacity of following operating procedures is highly improved, and the comprehensive energy consumption lowered. Features of High-Efficiency Hydraulic Cone Crusher: 1.This cone crusher adopting the whole hydraulic operation, is easy to operate, and leads to the realization of automation and highly improved reliability and life performance.2.The simple construction accounts for its easy operation and maintenance, and leads to the realization of automation and highly improve reliability and life performance.3.This Hydraulic Cone Crusher is equipped with high reliable function and easy operation.4.Due to the optimizing design and hydraulic protection of this crusher, the rate of trouble has been highly reduced, and the rate of non-trouble operation can be expected to exceed 85% Working principle of High-Efficiency Hydraulic Cone Crusher: HPC series Hydraulic cone crusher can run under constant discharging opening, which avoid the discharging opening change caused by the up-and-down floating of the single hydraulic in the production process. It keeps the constant of the discharge opening by rotating the fixed cone, which improves the stability of the whole production process. Besides, the Iron protection device can ensure the immediate reset of the crusher after the iron lump goes through, which can keep the stability of the discharging opening. HPC series cone crusher can produce finer particle size with fewer crushing stages, which reduces the cost and saves the resource. Application of High-Efficiency Hydraulic Cone Crusher: Hydraulic Cone Crusher, whose reduction ratio up to 4-6 and the finished products are even, can be widely used in breaking hard, medium-hard, soft ore, such as various kinds of ore, the solvent, slag, building stones, marble,etc. compression strength does not exceed 320Pa. This machine is suitable for mines,building materials,highway,railway,water conservancy and chemical industry,etc. Technical data of Hydraulic Cone Crusher: ModelMovable Cone Diameter (mm)Chamber StyleMin. Discharging (mm)Max. Feeding (mm)Capacity (t/h)Power (kw)Machine Size (mm)HPC2201220Coarse19210185-3002202726×1950×2182Fine13105150-210HPC4001570Coarse30290400-5004003447×2830×2977Fine16135260-400
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...