IPDB › China Industry › Industrial Equipment & Components › Welding Equipment
High Quality Torch Conveyor Low Cost Nitrogen Hydrogen Hybrid High Ultra High Vacuum Furnace V8l1
Welding Equipment, Vacuum Furnace, Vacuum Oven
Termway (Beijing) Precision Technology Co., Ltd.
Preview:
Product Description High Quality Torch Conveyor Low Cost Nitrogen Hydrogen Hybrid High Ultra High Vacuum Furnace V8LTechnical Data of Vacuum Reflow Soldering System V8:1. Significantly reduce the welding bubbles in the solder, making the void rate as low as 1-2%.2. Improve the electrical performance of the product and the welding joints, effectively improving the reliability of the welding point and the welding quality.3. It can be used for double-sided welding of PCB, suitable for mass production, and can be continuously put into the production line. The production cycle is controlled at an average of 30-60S.4. The degree of vacuum, vacuum holding time, deflation time, vacuum rate, etc. can be set freely.5. The circuit board with aluminum heat sink can be welded.6. Low power consumption and high heat insulation design based on the concept of environmental protection. The case temperature does not exceed 40 degrees.7. High-efficiency and large-capacity flux recovery device.8. Use integrated oxygen sensor technology to ensure precise control of oxygen content, and real-time/continuous monitoring of residual oxygen content in the furnace.9. The equipment can be used as an ordinary nitrogen or air furnace at the same time.Technical Data of Vacuum Reflow Soldering System V8L(Required)Technical specificationsmodel: V8LActual index valueActual index valuelengthMAX 400mmwidthMAX 450mmheightMAX 30mmPerformance parameterheating methodHot air heatingSpeed adjustable range≥20cm/minMax. heating temperatureMAX 350oC heating temperature<200ppmHeating rate range1-3oC/sHeating rate range1-3oC/sThe temperature of the baked product80oCHeating rate range±4oCNumber of equipment temperature zones (heating)8+1Number of equipment temperature zones (Cooling)2Warm-up time (heating time)According to the specific requirements of the processOil pump meets the demand of clean room/class 10,000Class 10,000Class 10,000≤2mbarDimension/WeightDimension (m)6.3m(L)*1.55m(L)*1.7m(H)Weight (Kg)1600kgPowerVoltage 380VFrequency50HzPower ConsumptionMaximum power 32KWAverage power 10KWUPSOptionalForming Gas/N2Connector Diameter 10mmPressure 0.3MPa-0.6MPaNitrogen consumption300L/minFlow Rate 80psi(0.5Mpa, gas flow rate 80L/M)Compressed AirConnector Diameter10mmPressure0.3MPa-0.6MPaFlow Rate80psi(0.5Mpa, gas flow rate 80L/M)ExhaustExhaust FlowMAX 8L/sCooling WaterConnector Diameter10mmFlow RateInstantaneous maximum 18L/sInstantaneous maximumDelivery cycle/week60 daysCan the delivery be delayed when the on-site installation conditions are not metYesTechnical support, training requirementsThe response time for troubleshooting at the site is within 48 hours, and training is included.Arrive at the site for 24 hours, and installation training is included.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.