Spot Supply Heavy Duty Industrial Stainless Steel Oven¹

Product Description  Product DescriptionStainless Steel Oven  Product OverviewEssential for general heating routines - from drying samples to curing microchips, a precise oven is one of the fundamental instruments every laboratory or workshop should have. GMS stainless steel industrial ovens accommodate a variety of thermal processing applications up to 200oC. Our industrial ovens are ideally suited for drum heating, aging, core hardening, drying, preheating, curing, and component testing. With additional options, these industrial ovens can also be used for applications such as paint baking, plastic curing, varnish baking, sterilizing, and rubber,silica gel and epoxy curing in a clean or chemical space. Key Features1.Heavy-duty, full welded structural steel frame2.Stainless steel fully welded internal liner3.available in both shelf or truck loaded configurations4.Adjustable air exchange system which allows fresh air to flow into the oven and exhaust gas get out of the oven5.Aluminum silicate insulation to ensure safe cabinet skin temperature6.Independent, over-temperature protection7.Circuit breaker provided for ground fault protection as standard8.Compact design9.High volume horizontal air recirculation system and electric heating system allow for maximum temperature uniformity in performance10.Excellent reliability and performance ratings ModelGM-DKX-B01GM-DKX-B02GM-DKX-B03GM-DKX-B04Interior DimensionsHxWxD1550x1200x10001600x1200x9501200x1300x8001350x1260x1050Exterior DimensionsHxWxD1830x(1500+235)x11402100x(1480+235)x11001620x(1600+235)x9501880x(1560+235)x1200Capacity1860L1820L1250L1780LHeating Power12kw12kw9kw12kwTemp. RangeRoom temp. +20~200°CControl accuracy± 1.0°CTemp. Distribution Accuracy±4°C (at 100°C), ±6°C (at 150°C)Temp. Rising TimeAbout 30min (Room temp.→150°C). empty chamberOperation FunctionOptional for fixed temp. or program operationPower Source3 phase AC380V  OptionsTouch screen control panelExtra point thermocouple surveyTemperature recorders (paper or paperless)Special control systemsProgrammable controller, Ethernet, and USB communicationsClean room packaging for shipment and installationData logging and trendingLight towerRS232/RS485 communications converter24-hour, 7-day digital process timerExtra heavy loading capability trolley CustomizationOur custom ovens designed and built to the customers' exact specifications and heat processing requirements. Seeexamples of these products to view the wide range of industrial heat processing systems we offer and have manufactured for our clients. Our oven systems are quality built, turn-key, efficient, low maintenance. Specific working space size, material, observation window, testing hole, or exterior color are all accepted.We also offer in heat testing and analysis of your product to ensure the exact oven design for your specific application. If you have a specific tolerance or specification which must be met, please contact us with your requirements so we can ensure the equipment is designed, tested, and adjusted to meet those requirements. Main ProductCompany ProfileGMS Technology specialized on manufacturing and sales of industrial ovens, and drying cabinets for LED optoelectronics, SMT/SMD, precision electronics, semiconductors, integrated circuit, 3D materials, automotive, new energy, aerospace industries, universities and research institutions.Our equipment covering high temperature (+30 to 600oC), vacuum (1to 1*10torr), and high pressure (8MPa) applications, and clean room baking equipment. And our engineer team are able provide customized solutions based on application requirements, and also new technology such as bar code scanning, automatic door opening, communication with MES, EAP systems to build a moder automatic production workshop.Our main products include:                                          .Precise ovens                                                             .Truck-in ovens                                          .High temperature ovens                                             .Anaerobic (inert gas) ovens                                          .Clean room ovens                                                      .Nitrogen ovens                                          .Vacuum ovens                                                            .Pressure ovens                                          .Wafer annealing ovens                                               .Conveyor ovens                                          .Automatic ovens                                                         .Dyring cabinets   Our AdvantagesApplication ScenariosOur CertificatePackaging & Shipping 1.Basic Protective PackagingInner Packaging·Cushioning Materials:EPE foam, plastic foam and inner corrugated cardboard, with protective film for complete equipment wrapping·Waterproof Sealing:Waterproof bag covering the equipmentOuter Packaging·Wooden Frame: IPPC-certified fumigated wooden crate·Edge Protection: Metal corner guards + nylon strapping (forklift impact prevention)·Base Pallet: Steel/plastic pallet (10cm ground clearance for moisture protection)2. Warning LabelsInternational standard symbols (tilt/moisture protection/stacking limits) FAQWhat should be paid attention to when using the dry cabinet?1. Please install the dry cabinet on a suitable level ground, make the center of gravity of the dry cabinet at the best position, and fix the rotating casters at the bottom of the cabinet to make the cabinet stable.2. Please place the dry cabinet in a level place away from high temperature and direct sunlight, so as not to affect the working performance of the dry cabinet.3. In order to make the dehumidifer smoothly exhaust moisture, please keep the back of the cabinet at least 10cm away from other objects (away from the air-conditioning inlet and outlet).4. Don't put the dry cabinet in a damp or splashy place. The splashed water or dirt should be wiped clean with a soft cloth in time.5. Keep the area around the dry cabinet clean. It is strictly forbidden to put inflammable and explosive dangerous goods and strong corrosive acids and alkalis.6. Regularly check the indicator status of the control panel, the temperature and humidity indicator status,whether the screen display is clear, whether there is any defect, abnormal flashing or screen skipping, and the control buttons.7. When the dry cabinet is used for the first time, it needs to run for 24 hours before putting the product in.8. When the humidity reaches the set value and stabilizes, open the door for a few minutes to check whether the humidity display value rises in the cabinet. What is the difference between the dry cabinet and the nitrogen cabinet? The biggest difference is mainly in performance and functionality. In terms of performance, the physical dehumidification dry cabinet can be set to medium humidity, low humidity and ultra-low humidity according to storage requirements, and the ultra-low humidity capacity can also reach a relatively good state. But in terms of dehumidifying speed, it is far from being compared with the nitrogen cabinet. The nitrogen cabinet needs to be used in conjunction with nitrogen, and has the ability to quickly dehumidify. It can quickly drop humidity to below 2% RH. It only takes about 5-10 minutes to recover the set value after opening and closing the door, so that it is suitable for frequent door opening and closing occasions.In terms of functionality, the physical dehumidification dry cabinet can still be used to continue dehumidifying after the power is cut off, and the humidity will not rise by more than 10% within 24 hours. The nitrogen cabinet mainly uses the humidity setting value to control the air intake, which can improve the cleanliness of the cabinet and has the effect of anti-oxidation. Is the maintenance of the dry cabinet complicated? GMS dry cabinet mainly adopts modular design, from small parts to large temperature and humidity display, control system and dehumidifier module, which can be quickly replaced. They are easy maintenance and repair, greatly improving maintenance efficiency. Maintenance of the dehumidifier movement needs to remove the four screws of the movement on the back of the dry cabinet, and install a new movement. Therefore, even if the dry cabinet fails, the maintenance is very convenient and simple. 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.