Double-Channel Potentiostat Galvanostat Bipotentiostat Electrochemical Workstation CS2150m¹

Product Description     BiPotentiostat/BiGalvanostat model CS2150M(without EIS) has two sets of built-in independent potentiostat /galvanostat. So it equals that you have 2 sets single-potentiostat in one chassis. Full floating module and electrical isolation design guarantee each channel is totally independent, which ensures accurate data. Experiments can be conducted simultaneously in each channel. Besides this, the two channels can jointly complete experiment of two-working electrode system such as RRDE and Hydrogen diffusion. CS2150M bipotentiostat is the real double-channel potentiostat. It uses Ethernet connection. Neither of the channels includes EIS function.Applications(1) Electrosythesis, electrodeposition (electroplating), anodic oxidation, electrolysis (2) Oxygen reduction reaction(ORR), oxygen evolution reaction (OER), Hydrogen evolution reaction(HER), carbon dioxide reduction.(3) Energy and materials (Li-ion battery, solar cell, fuel cell, supercapacitor), advanced function materials, and sensor.(4) Corrosion behavior of metals, and anti-corrosion evaluation(5) Fast evaluation of inhibitor, water quality stabilizer, coating, and cathodic protection efficiency.Typical applications for the bipotentiostatRotating Ring-Disk Electrode (RRDE)Oxidation/reduction reaction (ORR) study: while measuring the polarization curve of disk electrode in the main channel, apply a constant polarization potential on the ring electrode, and thus detect the intermediate products on the disk electrode. RRDE test becomes the typical method for ORR study. CS2150M can be connected to any RRDE equipment. Hydrogen Diffusion Test (HDT)CS2150M bipotentiostat is combined with H-cells. By measuring current of cathode hydrogen charging and hydrogen atoms anode oxidation, it can further calculate the diffusion coefficient of hydrogen atoms in metal and hydrogen flux.Specifications  Specifications Support 2-, 3- or 4-electrode systemInterface: EthernetPotential control range:  ±10V on each channelCurrent control range: ±1A on each channelPotential control accuracy: 0.1%×full range±1mVCurrent control accuracy: 0.1%×full rangePotential resolution: 10μV (>100Hz), 3μV (<10Hz)Current sensitivity:1pARise time: <1μS (<10mA), <10μS (<2A)Reference electrode input impedance:1012Ω||20pFCurrent range: 2nA~2A, 10 rangesCompliance voltage: ±21VMaximum current output: ±2ACV and LSV scan rate: 0.001mV~10,000V/sCA and CC pulse width: 0.0001~65,000sCurrent increment during scan: 1mA@1A/msPotential increment during scan: 0.076mV@1V/msSWV frequency: 0.001~100 kHzDPV and NPV pulse width: 0.0001~1000sAD data acquisition:16bit@1 MHz,20bit@1 kHzDA Resolution:16bit, setup time:1μsMinimum potential increment in CV: 0.075mVIMP frequency: 10μHz~1MHzLow-pass filters: Covering 8-decadePotential and current range: AutomaticWeight / Measurements: 7kg,36.5 x 30.5 x16cm Operating System: Windows 0/11Techniques/Methods of CS2150MStable polarizationOpen Circuit Potential (OCP)Potentiostatic (I-T curve)GalvanostaticPotentiodynamic (Tafel plot)Galvanodynamic (DGP)Sweep-Step Functions (SSF)Transient PolarizationMulti Potential StepsMulti Current StepsPotential Stair-Step (VSTEP)Galvanic Stair-Step (ISTEP)Chrono MethodChronopotentiometry (CP)Chronoamperametry (CA)Chronocaulometry (CC)VoltammetryLinear Sweep Voltammetry (LSV)Cylic Voltammetry (CV)Staircase Voltammetry (SCV)Square Wave Voltammetry (SWV)#Differential Pulse Voltammetry (DPV)#Normal Pulse Voltammetry (NPV)#Differential Normal Pulse Voltammetry (DNPV)#AC Voltammetry (ACV)2nd harmonic AC Voltammetry (SHACV)Fourier Transform AC Voltammetry (FTACV)#there is the corresponding stripping method. AmperometricDifferential Pulse Amperometry (DPA)Double Differential Pulse Amperometry (DDPA)Triple Pulse Amperometry (TPA)Integrated Pulse Amperometric Detection (IPAD)Corrosion MeasurementsCyclic polarization curve (CPP)Linear polarization curve (LPR)Electrochemical Potentiokinetic Reactivation (EPR)Electrochemical Noise (EN)Zero resistance Ammeter (ZRA)Battery testingBattery Charge and DischargeGalvanostatic Charge and Discharge (GCD)Potentiostatic Charging and DischargingPotentiostatic Intermittent Titration TechniqueGalvanostatic Intermittent Titration TechniqueExtensionsData LoggerElectrochemical Stripping/ DepositionBulk Eletrolysis with Coulometry (BE)Rs Measurement Software FeaturesCyclic voltammetry: CS studio software provides users a versatile smoothing/differential/ integration kit, which can complete the calculation of peak height, peak area and peak potential of CV curves. In CV technique, during the data analysis, there is function of selecting exact cycle(s) to show. You can choose to see a cycle or some cycles as you want. You can also export data or vector graph of an exact cycle or several cycles.Tafel plot and corrosion rate: CS studio also provides powerful non-linear fitting on Butler-Volmer equation of polarization curve. It can calculate Tafel slope, corrosion current density, limitation current, polarization resistance, corrosion rate. It can also calculate the power spectrum density, noise resistance and noise spectrum resistance based on the electrochemical noise measurements.Battery Test and analysis: charge & discharge efficiency, capacity, specific capacitance, charge & discharge energy.Real-time saving of data: The data can be automatically saved even in case of sudden power failure. Combination/sequence test: it can achieve automation of experiments and save time. With the unique function of combination test, you can choose several experiments you want to run. Then you can make auto run of the pre-set experiments as you want without having to wait in the lab. This function is especially useful if you have multi experiments to run and save your time greatly.Sequence Test: corrosion tests SequenceTest: Pseudocapacitor testsData open: You can open the data files by txt format in notepad. Data can also be opened in OriginBiPotentiostat / BiGalvanostat model CS2150MStandard supply Include: Instrument CS2150M x1CS studio software x1Power cable x1, LAN  cable x1, Cell cable x 4Dummy cell (1kΩ||100μF) x2After-sales Service (**All the after service is FREE)1. Warranty period: 3 years.2. Provide installation guide, manual, software installation video, and training videos. 3. Lifetime free software upgrading of the same model and technical service.4. Free repair service    

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.