TMAXCN Brand 1600c Multi Zone Mini Tubular Furnace with Alumina Ceramic Tube¹

Product Description 1600C Multi Zone Mini Tubular Furnace with High Purity  Alumina Ceramic TubeTMAX-Threefurnace2 1600°C 3-zone tube furnaces use SiC and MoSi2 as their heating elements. Furnace hearth is built with Mitsubishi(Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimadenfp93 from Japan) with +/-1 °C accuracy and 40 programmable segments. Furnace housing is built with double-layer steel and two cooling fans inside keep the furnace body temperature low. Furnace tube is sealed by stainless steel vacuum sealing flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use. These furnaces have built-in interface to a computer. We provide connection cable, adaptor and software that can be used to control the temperature and parameters of the furnace, all from your PC! You can also save a temperature curve for record or study purposes. All our furnaces are CE certified.Safety features1        Furnace overheat protection cuts off power when temperature is over the desired range.2        Thermocouple protection cuts off power when the thermocouple is broken or malfunctioned.3        Temperature variation protection cuts off power when the difference between actual temperature and target temperature is off the desired range. (refer to controller's manual)4         Power failure protection resume furnace operation right after the point of failure when power is back up. 5        Stainless steel flange support makes sure the tube and flanges are secure and in their absolute position, it also longer the life of the tube.Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.Specifications Electrical requirements 110-240VAC, 50/60 Hz, single phase Tube material  High purity (99%) alumina ceramic  Min. working temperature 300°C Max. working temperature  Zone1: 1400°C Zone2: 1600°C Zone3: 1400°C Max. constant working temperature Zone1: 1300°C Zone2: 1500°C Zone3: 1300°C Rated vacuum pressure  0.001 Pa / 0.0075 millitorr / 0.00001 mbar Rated positive pressure 0.02 MPa / 150 torr / 3 psi Refractory lining Mitsubishi (Japan) high quality 1600 and 1700 grade fiber alumina Heating element type  Zone1: SiC Zone2: MoSi2  Zone3: SiC Thermocouple type Zone1: S  Zone2: B  Zone3: S Temperature controller Shimaden fp93 (Japan) with 4 programs and  40 segments (i.e. 4 x 10 segments or 2 x 20 segments) Or Yudian (China)  Max heating rate 10°C/min     Recommended heating rate 5°C/min     Heating zone length Zone1: 11 inches   Zone2: 12 inches  Zone3: 11 inches  Constant temp zone length       Zone1: 4.5 inches  Zone2: 5.5 inches Zone3: 4.5 inches  Temperature controller precision +/- 1°C Vacuum sealing flange kit Stainless steel vacuum sealing flanges with one vacuum gauge,        two valves and four thermal ceramic blocks. CE compliance  Yes Size comparison Tube size 60mm x 1300mm (OD x length)  80mm x 1300mm (OD x length)  Maximum output Zone1/2/3: 4kW/5kW/4kW  Zone1/2/3: 4kW/5kW/4kWStandard PackagePart description          Quantity    tube furnace  1 pc  Stainless steel vacuum sealing flange set w/ pressure meter  1 set  Alumina ceramic tube1 pc Flow meter  1 pc  Spare heating element 2 pcs  Stainless steel hook  1 pc  Alumina ceramic thermal block  2 pairs Thermal gloves 1 pair Furnace and Shimaden controller manual2 pcs 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.