CIPDB › China Industry › Instruments & Meters › Laboratory Instruments
Advanced Walk-in Chambers Manufacturer From China1
Laboratory InstrumentsWalk in ChambersWalk in Room Manufacturer
Guangdong Komeg Industrial Co., Ltd.
Preview:
Product Description Advanced Walk-in Chambers Manufacturer From ChinaI. Product OverviewWalk-in Chmabers are able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental testing equipment and test methods for the basic parameters of electric and electronic products under the condition of humidity, low temperature, high temperature, and constant heat.II. ApplicationApplicable to environmental adaptability and reliability test in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research institution, inspection and quarantine bureau, university etc...III. FeaturesGB-2423.1-89(IEC68-2-1)Test A: Low Temperature TestGB-2423.2-89(IEC68-2-2)Test B: High Temperature TestGJB360.8-87(MIL-STD. 202F) High Temperature Life TestGBJl50.3(MIL-STD-810D) High Temperature TestGJBl50.4(MIL-STD-810D) Low Temperature TestGB2423.3-93(IEC68-2-3)Test Ca: Constant Heat TestGB2423.4-93(IEC68-2- 30)Test dB: Damp Heat Alternative TestGJBl50.9-93(MIL-STD-810D) Damp Heat Test1. Energy conservation Bypass mode to adjust cooling capacity to achieve a constant temperature and humidity effectively2. Easy Operation Using company owned brand KOMEG KM-3166 LCD touch screen controller with PID control parameters settingFlexible approach for data collection and recording3. High reliability Key parts are imported, ensuring the service life and high reliabilityEfficient oil separator to ensure the service life of the compressorIV. Parts and its Brand for Cooling systemPart Brand RemarksCompress: Tecumseh Hermetic piston compressors with low noiseOil Splitter: ALCO, AC&R, ESKEvaporator( plate): DANFOSSPressure relay: DANFOSS, RANCOCondenser( plate): DANFOSSDrying screening program: DANFOSS, SPORLANCapillary: KOMEGExpansion valve: DANFOSS, SPORLANSolenoid valve: SAGINOMIYA, CASTELExhaust gas pressure regulating valve: SAGINOMIYACondensing pressure regulating valve: SAGINOMIYA DANFOSSNote: Two options listed is for alternate choice and backup purposeV. Parts and its Brand for Electrical control systemParts Brand RemarksController: KOMEG KM-3166 LCD touch screenWire protection switch: SchneiderAC contactor: FUJI, SchneiderThermal relay: SchneiderPhase sequence relay: FUJI, CROUZETTime Relay: PanasonicAC contactor: SchneiderSolid State Relays: Carlo GavazziTemperature fuse: EMERSON, MICROTEMPNote: Two options listed is for alternate choice and backup purposeSpecification of Walk-In ChambersModelKMHW-13Volume(m3)27.1CBMInterior DimensionsW3000*H2100*D4300mmExterior DimensionsW5050*H2350*D2250mmSafety Devices(standard)No fuse breaker, over pressure\over heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protectionStandard accessoriesSight window*1,cable port(portΦ50mm)*1,chamber lamp*1, status indicatorControl System Balanced Temperature & Humidity Control SystemRefrigeration systemWater CooledSemi-hermetic compressor, single stage or cascade refrigeration system,CFC free refrigerant(HFC-507 and HFC-23)ControllerPanel7-inch LCD Touch panel,Chinese or English display selectableOperation modelProgram or fix point runningMemory capacity120 programs,1200steps, all repeat 999 cycles,part repeat 99 cyclesAccuracyTemp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digitInputTemp.:pt-100, Humidity:pt-100 or ~5V DCVComm.port RS-232 or RS-485 (Softawre is option)Temp. rangeMaximum:80oC,120oC;Minimum:-60oC,-50oC,-40 oC,-30oC,-20 oC,-10oC,0oCHumidity Range10%,20%,30%~95%Temp. constancy±0.5oCHumidity constancy±2.5%R.HTemp. uniformity±2.0oCHumidity uniformity±5.0%R.HAmbient Temp.+5oC~+35oCWiring methodAC 380±10%50Hz ,3 phase 4 wires +Ground WiresHeat up time +20oC~+80oC,Within 60 minPull down time +20oC~-55oC\-40oC\-20oC\-10oC,Within 120 or 90 or 60 minInterior materialStainless Steel Plate(SUS 304)Exterior materialBaked Painting Steel Or Stainless steel(SUS304)Insulation materialRigid polyurethane foamDoor size (mm)Single wing:W800*H1800;Double wing:W1600*H1800;Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...